|
| Power Supply Form Factor |
Front-access n+1 redundant (standard ATX or PS/2-size) |
|
| Power Supply Output Type |
EPS12V |
| Nominal Output Power |
550W |
| Power Factor Correction (PFC) |
Active |
| Power Factor |
0.95 |
| Specifications - n+1 Redundant Models |
Redundant Supply Type |
Dual hot-swap (n+1) |
|
| Peak Output Power |
500W |
| Output Voltage(s) |
+5VDC
+12VDC
-5VDC
-12VDC
+3.3V
+5Vsb |
| +5V Output |
Peak Output Current |
30A |
Min. Output Current / Load |
2A | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
50mV (peak-to-peak) | | +12V Output |
Peak Output Current |
41A |
Min. Output Current / Load |
2A | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
120mV (peak-to-peak) | | –12V Output |
Peak Output Current |
1A |
Min. Output Current / Load |
0μA | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
120mV (peak-to-peak) | | –5V Output |
Peak Output Current |
500mA |
Min. Output Current / Load |
0μA | Line Regulation |
-1%....1% | Load Regulation |
-10%....10% | Ripple and Noise |
100mV (peak-to-peak) | | +3.3V Output |
Peak Output Current |
24A |
Min. Output Current / Load |
1A | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
50mV (peak-to-peak) | | +5Vsb Output |
Peak Output Current |
2A |
Min. Output Current / Load |
100mA | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
50mV (peak-to-peak) | | +3.3V & +5V Combined Max. Power |
180W |
| +3.3V, +5V, & +12V Combined Max. Power |
525W |
| Efficiency |
74% |
|
| Power Supply Input Type |
AC |
| Nominal Input Voltage |
115/230VAC |
| Input Voltage Range(s) |
90...132 or 180...264VAC |
| Input Frequency |
47...63Hz |
|
| Power Input Connector(s) |
Two NEMA standard male PC cord sockets (1 per module) |
| Output Connector(s) |
Connector(s) to CPU/Motherboard |
4-pin ATX / ATX12V additional 12V connector
24-pin ATX / EPS12V standard female connector
8-pin ATX / EPS12V female +12V power connector |
Connector(s) to Drives/Accessories |
Floppy power connector (4-pin, female)
4 SATA female power connectors (15-pin)
2 PCI Express female power connector (6-pin)
8 standard Molex internal drive/device power connectors (4-pin, female) | |
| Indicators |
Power On/Off |
LED indicates power on |
Power Supply Status/Alarm |
2 LEDs (one per power source) | | Power On/Off Switch |
1 per power supply |
| Other Controls/Features |
Power failure alarm and signals
Remote sensor on +5V and +3.3V |
|
| Cooling Summary |
4 cooling fans |
| Number of Cooling Fans |
4 |
| Cooling Fan Details (1) |
Number of fans of this type |
4 |
Cooling Fan Size |
40mm X 40mm | |
| Operating Temperature |
32°F....122°F
(0°C....50°C)
|
| Storage Temperature |
-40°F....158°F
(-40°C....70°C)
|
| Relative Humidity, noncondensing |
20%....90% |
|
| Safety/Approvals |
Meets UL standards
Meets TUV standards
Meets CISPR22 Class B EMI specs |
| Protection |
Overvoltage |
+5V: 5.7V to 6.5V; +3.3V: 3.9V to 4.5V; +12V: 13.3V to 14.5V; +5VSB: 5.7V to 6.5V |
Short-Circuit |
Yes | Overpower |
110...160% | | MTBF |
100000 hours |
|
| Width |
5.91"
(150mm)
|
| Height |
3.35"
(85mm)
|
| Depth |
7.83"
(199mm)
|
