|
| Power Supply Form Factor |
Standard ATX or PS/2-size |
| Form Factor Special Features |
The PWR 600GF has a clip on the AC Input socket to prevent accidental loss of
power. The retaining clip can be moved off the power cord if there is a safety
issue or the chance of damage to the system due to falling off a bench. |
| Construction - Chassis Material |
Steel |
|
| Power Supply Output Type |
EPS12V |
| Nominal Output Power |
600W |
| Power Factor Correction (PFC) |
Active |
|
| Peak Output Power |
600W |
| Output Voltage(s) |
+5VDC +12VDC -12VDC +3.3V +5Vsb |
| +5V Output |
Peak Output Current |
25A |
Min. Output Current / Load |
500mA | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
50mV P-P | | +12V Output |
Peak Output Current |
40A |
Min. Output Current / Load |
2A | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
120mV P-P | | –12V Output |
Peak Output Current |
0μA |
Min. Output Current / Load |
800mA | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
120mV P-P | | +3.3V Output |
Peak Output Current |
25A |
Min. Output Current / Load |
500mA | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
50mV P-P | | +5Vsb Output |
Peak Output Current |
3.5A |
Min. Output Current / Load |
100mA | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
50mV P-P | | +3.3V, +5V, & +12V Combined Max. Power |
573W |
| Hold-Up Time |
16ms |
| Efficiency |
80% |
|
| Power Supply Input Type |
AC |
| Nominal Input Voltage |
115/230VAC |
| Input Voltage Range(s) |
90...240VAC |
| Input Frequency |
47...63Hz |
| Input Range Selector |
Autoranging |
| Input Current |
8A at 115VAC, 4A at 230VAC |
| Inrush Current (max.) |
65/125 MAX. FOR 115/230VAC |
|
| Power Input Connector(s) |
NEMA standard male PC cord socket |
| Power Cord Included |
6-ft USA power cord included |
| Output Connector(s) |
Length of Cable(s) to CPU/Motherboard |
19"
(482.6mm)
|
Length of Cable(s) to Drives/Accessories |
2.33ft
(711.2mm)
| Output Connector(s) Features & Details |
Standard Molex internal drive/device power connector (4-pin, female):
Floppy power connector (4-pin, female):
2 SATA female power connectors (15-pin): | |
| Indicators |
Power On/Off |
LED on rear panel LED indicates power on |
| Power On/Off Switch |
1 on/off switch |
|
| Cooling Summary |
Cooling fan |
| Number of Cooling Fans |
1 |
| Cooling Fan Details (1) |
Number of fans of this type |
1 |
Cooling Fan Size |
80mm X 80mm | |
| Operating Temperature |
32°F....122°F
(0°C....50°C)
|
|
| Safety/Approvals |
Meets TCO'95 standards |
| Protection |
Overvoltage |
Yes |
Short-Circuit |
Yes | Overpower |
Yes | |
| Width |
5.91"
(150mm)
|
| Height |
3.43"
(87mm)
|
| Depth |
6.57"
(167mm)
|
| Dimension Details |
Depth, Total (Includes bracket to AC Input socket: 167mm Depth, Interior (includes bracket to back panel of case): 155mm Depth, case only: 140mm |
|
| Weight |
5.36lbs
(2.43kg
)
|