|
| Construction - Chassis Material |
Steel
Plastic |
| Mounting Configuration |
Wall-mount
Clamp-mount |
| VESA Mounting Hole Pattern |
75x75mm VESA mounting holes |
| Maximum Weight Supported |
16lbs
(7.26kg
)
|
| Minimum Weight Supported |
5lbs
(2.27kg
)
|
| Gas Cylinder |
Yes |
| Cable Management System |
Cables clip to frame, out of the way. |
| Max. Desk Thickness |
3.5"
(88.9mm)
|
| Max. Arm Length/Extension |
19"
(482.6mm)
|
| Color |
Beige |
| Arm/Stand Special Features |
Clamping hardware allows clamp-mounting to the edge of a benchtop (3.5" max. bench thickness) or screwed into a wall (screws not included). Not recommended for panel PCs. |
|
| Total Number of Pivot Points |
5 pivot points |
| Movement at Top (display end) |
360 degree rotation |
| Movement at Next Joint (2) |
180 degrees pan (left-right) |
| Movement at Next Joint (3) |
180 degrees tilt (up-down) |
| Movement at Next Joint (4) |
Arm raises/lowers 90 degrees |
| Movement at Base |
360 degree rotation at base |
|
| Width |
5.07"
(128.78mm)
|
| Height |
17.25"
(438.15mm)
|
| Depth |
5.16"
(130.94mm)
|
| Dimension Details |
Arm Dimensions:
- Height: 17.25" measured from desk top to center of VESA plate pattern (plate being perpendicular to desk top).
- Height:20.25" measured from bottom of clamp (set to middle hole) to center of VESA plate pattern (plate being perpendicular to desk top).
Clamp Dimensions:
|
|
| Weight |
10.48lbs
(4.75kg
)
|
