|
| System Bus |
Ethernet |
| Data Rate per Port, Max. |
460.8 kbps |
| FIFO Buffer Length |
128 Bytes |
| Included Cable(s) |
- 3-ft straight-through Ethernet cable
- 3-ft crossover Ethernet cable
- 5VDC power converter with 6-ft. cable
|
| Mounting Configuration |
Desktop / benchtop
DIN-rail mount |
| Construction Material |
Steel |
|
| Serial Ports |
UART/Controller Type |
16954 |
Function Type |
DCE device | Number of RS-422/485 Serial Ports |
4 | Serial Port Mode Select |
Software-selectable
Switch-selectable
Port type individually selectable per port. | RS-422 Signals Supported |
GND : Signal Ground
TD+ (TX+) Transmit Data +
TD- (TX-) Transmit Data -
RD+ (RX+) Receive Data +
RD- (RX-) Receive Data -
RTS+ : Request to Send
RTS- : Request to Send
CTS+ : Clear to Send
CTS- : Clear to Send | RS-485 Signals Supported |
GND : Signal Ground
TD+ (TX+) Transmit Data +
TD- (TX-) Transmit Data -
RD+ (RX+) Receive Data +
RD- (RX-) Receive Data -
RTS+ : Request to Send
RTS- : Request to Send
CTS+ : Clear to Send
CTS- : Clear to Send | RS-485 Modes Supported |
Full-duplex
Half-duplex | Connector(s) |
Number of Connectors |
4 | Connector Type |
DB-9 (9-pin) | Connector Gender |
Male (pin) | Connector Details |
For best performance, please terminate any control signals that will not be used. The most common termination is: | | Ethernet |
Number of Ethernet Channels |
1 x 10/100Base-T |
Ethernet Connectors |
1 x RJ-45 | |
| Power Consumption |
2A @ +5V, max. |
|
| Operating System(s) Supported |
Windows XP
Windows 2000
Windows 98
Windows 98SE |
|
| Operating Temperature |
32°F....122°F
(0°C....50°C)
|
| Relative Humidity, noncondensing |
10%....90% |
|
| Safety/Approvals |
Meets FCC Part 15 - Class A EMI specs
Meets EMC Directive 89/336/EEC
Meets CE Class A
Meets EMC Directive 73/23/EEC
Meets UL 94V0 standards |
| MTBF (average) |
150000 hours |
|
| Width |
8.63"
(219.07mm)
|
| Height |
2.19"
(55.56mm)
|
| Depth |
6"
(152.4mm)
|
|
| Weight |
1.26lbs
(570g
)
|
