|
| System Bus |
PC/104 |
| Mounting Configuration |
Stacking module or daughterboard |
| Module Mounting Compatibility |
PC/104 |
| On-Board FIFO Memory Buffer |
512 samples |
|
| Number of Channels |
16 |
| Single-Ended Channels |
16 |
| Differential Channels |
8 |
| Differential with Multiplexer, Max |
256 |
| Simultaneous Sampling S.E. Channels, Max |
16 |
| A/D Chipset |
ADS7805 successive approximation ADC |
| A/D Converter Resolution |
12-bit |
| Max. A/D Speed (throughput) |
150KHz |
| A/D Converter Settling Time |
3.3µs |
| Accuracy |
Relative Accuracy |
- 4CYDAS 1612J: 0.01% of reading, ±1 LSB
- 4CYDAS 1616J: 0.003% of reading, ±1 LSB
|
Nonlinearity |
±1 LSB | Gain Drift |
- 4CYDAS 1612J: ±6ppm/°C
- 4CYDAS 1616J: ±7ppm/°C
| Zero Drift |
- 4CYDAS 1612J: ±1ppm/°C
- 4CYDAS 1616J: ±2ppm/°C
| | Noise |
CMRR (Common Mode Rejection Ratio) |
70dB |
| Input Impedance |
10MΩ |
| A/D Special Features |
- Simultaneous sampling via an optional external sample & hold panel
- Absolute Max. Input Voltage: ±35V
|
|
| Bipolar Input Ranges |
-10V to +10V -5V to +5V -2.5V to +2.5V -0.625V to +0.625V -1.25V to +1.25V |
| Unipolar Input Ranges |
0 to +10V 0 to +5V 0 to +2.5V 0 to +1.25V |
| A/D Range Selection |
Software |
| Gains |
1 2 4 8 |
| Gain Range Details |
Absolute Max. Input Voltage: ±35V |
|
| Triggering Type(s) Supported |
Software trigger (software-controlled trigger) External pulse trigger (triggered by pulse on trigger input) Counter/timer trigger (triggered by on-board counter/timer) |
|
| Number of User Channels |
3 |
| Counter/Timer Size |
16-bit |
| Input Frequency, max. |
10MHz |
| Counter Type(s) |
Down counter |
| Counter/Timer Chip |
82C54 |
| Clock Source(s) |
Internal 10MHz clock |
| Accuracy |
100ppm |
| Signals |
Input Voltage - High (Vih) |
2V....5V |
Input Voltage - Low (Vil) |
0mV....0.8V | Output Voltage - High (Voh) |
3V....5V | Output Voltage - Low (Vol) |
0mV....0.4V | | Pulse Width, High, min. |
30ns |
| Pulse Width, Low, min. |
50ns |
| Gate Width, High, min. |
50ns |
| Gate Width, Low, min. |
50ns |
|
| Number of I/O Lines |
8 |
| Digital I/O Details |
- Digital Type: FPGA
- Interrupts: Programmable, levels 2 to 7
- Interrupt Enable: Programmable
- Interrupt Sources: End-of-conversion, DMA terminal count
|
| Primary Digital I/O |
Configuration |
4 inputs 4 outputs |
Input/Output Selection |
Fixed | Inputs |
Input Voltage - High (Vih, DC) |
2V....5V | Input Voltage - Low (Vil) |
0mV....0.8V | Outputs |
Output Voltage - High (Voh) |
3.86V....5.5V | Output Voltage - Low (Vol) |
-0.5V....0.32V | Output Current Sink, max. |
4mA | |
| Software Included Free with Product |
Diagnostic software |
| Operating System Compatibility |
Windows NT |
| Software Compatibility |
Labtech NOTEBOOK® Snap-Master® Universal Driver Library DASYLab® Labtech CONTROL® Labtech NOTEBOOKpro® Labtech CONTROLpro® DASYLab Lite® DAQFactory™ DAQFactory Lite™ LabVIEW® |
|
| Power Consumption (typical) |
Quiescent: +5VDC @ 140mA typ., 230mA max. Op. (A/D converting to FIFO): +5VDC @ 250mA typ., 375mA max. |
|
| Operating Temperature |
32°F....122°F
(0°C....50°C)
|
| Storage Temperature |
-40°F....212°F
(-40°C....100°C)
|
| Relative Humidity, noncondensing |
0%....90% |
|
| Safety/Approvals |
Meets CE standards Meets EMC Directive 89/336/EEC |
|
| Width |
3.6"
(91.44mm)
|
| Height |
0.6"
(15.24mm)
|
| Depth |
3.8"
(96.52mm)
|