|
| System Bus |
PCI (32-bit, 5V keyed) |
| Designed to Replace |
Keithley MetraByte Model #DAS-8P |
|
| Number of Channels |
8 |
| Single-Ended Channels |
8 |
| Differential with Multiplexer, Max |
128 |
| A/D Converter Resolution |
12-bit |
| Max. A/D Speed (throughput) |
40KHz |
| A/D Converter Settling Time |
10 microseconds |
| Accuracy |
Relative Accuracy |
+/-1 LSB. Differential Linearity Error: no missing codes guaranteed. Integral Linearity Error: +/-1 LSB. |
Temperature Drift |
Gain Drift: +/-180ppm/°C. Zero Drift: +/-60ppm/°C. | | Input Impedance |
10MΩ |
| A/D Special Features |
A/D converter type: AD1674J |
|
| Bipolar Input Ranges |
-5V to +5V |
| A/D Range Selection |
Fixed |
|
| Triggering Type(s) Supported |
Software trigger (software-controlled trigger) Counter/timer trigger (triggered by on-board counter/timer) |
|
| Number of User Channels |
3 |
| Counter/Timer Size |
16-bit |
| Input Frequency, max. |
10MHz |
| Counter Type(s) |
Down counter |
| Counter/Timer Chip |
82C54 |
| Signals |
Input Voltage - High (Vih) |
2V....5V |
Input Voltage - Low (Vil) |
0mV....0.8V | Output Voltage - High (Voh) |
3V....5V | Output Voltage - Low (Vol) |
0mV....0.4V | | Pulse Width, Low, min. |
50ns |
| Counter/Timer Special Features |
The output and gate lines for all three counters are available to the user, along with the inputs of counters 0 and 1. The input of counter 2 is hard-wired to the buffered PCI clock (33MHz) signal, divided by 8. The output of counter 2 maybe software-configured as the Interrupt Pacer. |
|
| Number of I/O Lines |
7 |
| Primary Digital I/O |
Configuration |
3 inputs 4 outputs |
Input/Output Selection |
Fixed | Outputs |
Output Current Sink, max. |
24mA | |
| Software Included Free with Product |
Diagnostic software |
| Software Included - Features |
InstaCal installation, calibration, and test utility |
| Operating System Compatibility |
Windows NT |
| Software Compatibility |
Labtech NOTEBOOK® Universal Driver Library Agilent VEE® DASYLab® Labtech CONTROL® Labtech NOTEBOOKpro® Labtech CONTROLpro® Agilent VEE® OneLab Agilent VEE Pro® DASYLab Lite® DAQFactory™ DAQFactory Lite™ LabVIEW® |
|
| Connector #1 |
Quantity |
1 |
Type |
DB-37 (37-pin) | Gender |
Male (pin) | Location |
Backplate of board | |
| Power Consumption (typical) |
251mA typ., 436mA max. @ +5V op. (A/D converting to FIFO). 13mA typ., 19mA max. @ +12V. 17mA typ., 23mA max. @ -12V. |
|
| Operating Temperature |
32°F....122°F
(0°C....50°C)
|
| Storage Temperature |
-4°F....158°F
(-20°C....70°C)
|
| Relative Humidity, noncondensing |
0%....90% |
|
| Safety/Approvals |
Meets CE standards Meets EMC Directive 89/336/EEC |