|
| System Bus |
PCI (32-bit, 5V keyed) |
| Mounting Configuration |
Internal card |
| On-Board FIFO Memory Buffer |
1024 samples |
|
| Number of Channels |
16 |
| Single-Ended Channels |
16 |
| A/D Chipset |
ADS7805 successive approximation ADC |
| A/D Converter Resolution |
12-bit |
| Max. A/D Speed (throughput) |
100KHz |
| A/D Converter Settling Time |
8µs |
| A/D Speed/Bandwidth Details |
Data Transfer: Polling, interrupt, FIFO half-full interrupt |
| Channel Queue Size |
256 positions |
| Input Impedance |
10MΩ |
| A/D Special Features |
Inputs can be modified for current on a channel-by-channel basis by installing resistors onto the card |
|
| Bipolar Input Ranges |
-10V to +10V
-5V to +5V
-2.5V to +2.5V
-0.625V to +0.625V
-1.25V to +1.25V |
| A/D Range Selection |
Software |
| Gains |
1
2
4
8
16 |
|
| Triggering Type(s) Supported |
Pretrigger (FIFO acquires data until trigger)
Software trigger (software-controlled trigger)
External pulse trigger (triggered by pulse on trigger input)
Counter/timer trigger (triggered by on-board counter/timer) |
|
| Number of Analog Output (D/A) Channels |
1 |
| D/A Chipset |
DAC75341 or equivalent, monolithic multiplying |
| D/A Converter |
Resolution |
12-bit |
Update Rate, All Channels, max |
30KHz | Settling Time, max. |
30µs | | Bipolar Output Ranges |
-10V to +10V |
| Unipolar Output Ranges |
0 to +10V |
| Current Output Ranges |
-20 to +20mA |
| Output Range Selection |
Jumper |
| Accuracy |
Nonlinearity |
±0.5 LSB |
| Analog Output Features |
Output Driving Capability: ±5mA max. |
|
| Number of User Channels |
1 |
| Input Frequency, max. |
2MHz |
| Counter Type(s) |
Down counter |
| Counter/Timer Chip |
82C54 |
| Counter/Timer Special Features |
- 3 independent programmable 16-bit down counters
- A/D Pacer: 32-bit timer (2 cascaded 16-bit counters) with a 2MHz time base
- Pacer Output: 0.00046 Hz to 100kHz
- Pre-Trigger Counter: One 16-bit counter for counting A/D conversion pulse
|
|
| Number of I/O Lines |
40 |
| Primary Digital I/O |
Configuration |
16 inputs
16 outputs |
Input/Output Selection |
Fixed | Signal Connector |
- 16 TTL-compatible inputs on a 20-pin header
- 16 TTL-compatible outputs on a 20-pin header
| Inputs |
Input Voltage - High (Vih, DC) |
2V....5.5V | Input Current, High (Iih) |
20mA | Input Voltage - Low (Vil) |
0mV....0.8V | Input Current, Low (Iil) |
-0.2mA | Digital Input Features |
- Input High: 2.7V @ 20mA max.
- Input High: Low: 0.8V @ -0.2mA max.
| Outputs |
Output Voltage - High (Voh) |
2.4V....5.5V | Output Voltage - Low (Vol) |
0mV....0.4V | Output Current Sink, max. |
8mA | Output Current Source Details |
0.4mA @ 2.7V (source) | | Auxiliary Digital I/O |
Configuration |
4 inputs
4 outputs |
Signal Connector |
- 4 inputs and 4 outputs on the 37-pin connector
| Inputs |
Input Voltage - High (Vih, DC)) |
2.4V....5.5V | Input Current, High (Iih) |
10μA | Input Voltage - Low (Vil) |
0mV....0.4V | Input Current, Low (Iil) |
-10μA | Outputs |
Output Voltage - Low (Vol) |
0mV....0.4V | Output Current Sink, max. |
8mA | Output Current Source Details |
4mA @ 2.4V (source) | |
| Software Included - Features |
Utility software, Windows® 98/2000/NT drivers, a Win95 DLL, a DOS driver, and LabVIEW® & VEE® drivers |
| Operating System Compatibility |
Windows NT
Windows 2000
Windows 98
MS-DOS
Linux |
| Software Compatibility |
Agilent VEE®
DASYLab®
DASYLab Lite®
LabVIEW® |
|
| Connector #1 |
Quantity |
1 |
Type |
DB-37 (37-pin) | Gender |
Female (socket) | Location |
Backplate of board | | Connector #2 |
Quantity |
2 |
Type |
20-pin header | Gender |
Male (pin) | Location |
Header on board | | Connector #3 |
Location |
Header on board |
| Connector & Cabling Details |
- One 20-pin header for digital signal input
- One 20-pin header for digital signal output
- One DB-37F connector for analog input, analog output, additional DIO signals, and counter/timer signals
|
|
| +5V |
570mA |
|
| Operating Temperature |
32°F....140°F
(0°C....60°C)
|
| Storage Temperature |
-4°F....176°F
(-20°C....80°C)
|
| Relative Humidity, noncondensing |
5%....95% |
|
| Card Length |
6.95"
(176.41mm)
|
| Card Height |
4.19"
(106.5mm)
|
| Card Thickness |
0.45"
(11.54mm)
|
| Shipping Width |
8.75"
(222.25mm)
|
| Shipping Height |
2.75"
(69.85mm)
|
| Shipping Depth |
11.25"
(285.75mm)
|
|
| Weight |
0.32lbs
(145.15g
)
|
| Shipping Weight |
1.18lbs
(535.24g
)
|