|
| System Bus |
PXI (3U) |
| Bus Information |
Bus Standards Compliance |
PICMG 2.0
PXI 2.0
PXI 2.2 |
| Card Backplate |
3U PXI / CompactPCI |
| Mounting Configuration |
Internal card |
| On-Board FIFO Memory Buffer |
1024 samples |
|
| Number of Channels |
64 |
| Single-Ended Channels |
64 |
| Differential Channels |
32 |
| A/D Converter Resolution |
16-bit |
| Max. A/D Speed (throughput) |
500KHz |
| A/D Converter Settling Time |
2µs to 0.1% error (gain = 1, 2, 4, 8) |
| Channel Queue Size |
512 positions |
| Accuracy |
Gain Error |
±0.01% of FSR |
| Noise |
CMRR (Common Mode Rejection Ratio) |
83 dB |
| Input Protection |
Protected against voltages to +/-30VDC, max. (power on), +/-15VDC (power off) |
|
| Bipolar Input Ranges |
-10V to +10V
-5V to +5V
-2.5V to +2.5V
-1.25V to +1.25V |
| Unipolar Input Ranges |
0 to +10V
0 to +5V
0 to +2.5V
0 to +1.25V |
| A/D Range Selection |
Software |
| Gains |
1
2
4
8 |
|
| Triggering Type(s) Supported |
Pretrigger (FIFO acquires data until trigger)
Post-trigger (starts at chosen point after trigger)
Software trigger (software-controlled trigger)
External pulse trigger (triggered by pulse on trigger input)
Analog slope trigger (trigger based on slope of acquired data points)
Counter/timer trigger (triggered by on-board counter/timer) |
|
| Number of Analog Output (D/A) Channels |
2 |
| D/A FIFO Memory Buffer |
1024 samples |
| D/A Converter |
Resolution |
12-bit |
Update Rate, All Channels, max |
1MHz | Settling Time, max. |
3µs to ±0.5 LSB accuracy | | Bipolar Output Ranges |
-10V to +10V
±external reference |
| Unipolar Output Ranges |
0 to +10V
0 to external reference |
| Output Range Selection |
Software |
| Output Range Details |
Output Driving Current: ±5mA max. |
| Accuracy |
Gain Error |
±0.02% of max. output |
Offset Error |
±1mV | Slew Rate |
20V/µs | | Analog Output Features |
FIFO Buffer: 1 k samples |
|
| Number of User Channels |
2 |
| Counter/Timer Size |
16-bit |
| Counter Type(s) |
Up/down counter |
| Clock Source(s) |
40MHz, external clock up to 10MHz |
|
| Number of I/O Lines |
24 |
| Digital I/O Details |
Compatibility: 5V / TTL |
| Primary Digital I/O |
Configuration |
24 bidirectional (three 8-bit ports) |
Digital I/O Chipset |
8255 | Signal Connector |
On main A/D connector on card backplate | |
| Software Included - Features |
DASK utility software
Windows ® 2000/XP/Visa/2K3 drivers and DLLs
LabVIEW® and MATLAB® drivers and an ActiveX controls component library |
| Operating System Compatibility |
Windows XP
Windows NT
Windows 2000
Windows 98
Linux
Windows Server 2003 |
|
| Connector #1 |
Quantity |
2 |
Type |
68-conductor (VHDC68 0.8mm very high density Centronics, thumbscrews) | Gender |
Female (socket) | Location |
Backplate of board | |
| Power Consumption (typical) |
+5V @ 1.2A typical |
|
| Operating Temperature |
32°F....131°F
(0°C....55°C)
|
| Storage Temperature |
-4°F....158°F
(-20°C....70°C)
|
| Relative Humidity, noncondensing |
5%....95% |
|
| Safety/Approvals |
Meets CE standards |
|
| Card Length |
6.7"
(170.24mm)
|
| Card Height |
3.94"
(100.1mm)
|
| Card Thickness |
0.8"
(20.22mm)
|
| Dimension Details |
CompactPCI, PXI, & 3U European form factor compliant
Length:
- End of PXI connector to inner back plate: 170.24mm
- End of PXI connector to end of latch: 206.84mm
- Board edge (in-board) to inner back plate: 160.58mm
Card Thickness:
- Back plate: 20.22mm
- PXI connector: 11.11mm
- Board, tallest component: 16.40mm
Card Height:
- Card height, inner board: 100.16mm
- Backplate height: 128.5mm form factor compliant
|
|
| Weight |
0.51lbs
(231.33g
)
|
