|
| System Bus |
ISA (8-bit, XT) |
| Mounting Configuration |
Internal card |
|
| Number of Analog Output (D/A) Channels |
8 |
| D/A Chipset |
AD660BN |
| D/A Converter |
Resolution |
16-bit |
Update Rate, All Channels, max |
80KHz | Update Rate, 1 Channel, max. |
80KHz | Settling Time, max. |
20V step to .0008%: 19µS maximum
10V step to .0008%: 9µS maximum | Settling Time, typ. |
20V step to .0008%: 12µS typical
10V step to .0008%: 6µS typical | Throughput Details |
PC Dependent | | Bipolar Output Ranges |
-10V to +10V
-5V to +5V |
| Unipolar Output Ranges |
0 to +10V
0 to +5V |
| Accuracy |
Nonlinearity |
Integral and Differential: ±1 LSB maximum |
Monotonicity |
Guaranteed monotonic to 15 bits over temperature | Gain Error |
Adjustable to zero | Offset Error |
Adjustable to zero | Gain Drift |
±15 ppm/°C | Offset Drift |
Unipolar Offset drift ±3 ppm/°C
Bipolar Offset drift ±5 ppm/°C | Slew Rate |
2.8V/µs typical | | Power-On State |
0 volts |
| Output Impedance |
100mΩ |
| Output Protection Details |
Output Short Circuit Duration: 40mA indefinite |
| Analog Output Features |
Double-buffered output latches
DACs updated individually or simultaneously (software-selectable)
Power up & reset, all DAC outputs pulled to 0 volts (±3mV max.) |
|
| Software Included Free with Product |
Diagnostic software
Setup_utility software |
| Operating System Compatibility |
Windows 2000
Windows 98
Windows 95
Windows 3.x
Windows NT 4
Windows 98SE |
| Software Compatibility |
Labtech NOTEBOOK®
Snap-Master®
Universal Driver Library
DASYLab®
Labtech NOTEBOOKpro®
DASYLab Lite®
DAQFactory™
DAQFactory Lite™
LabVIEW® (with optional drivers)
Agilent VEE® (with optional drivers) |
|
| Connector #1 |
Quantity |
1 |
Location |
Backplate of board | |
| Power Consumption (typical) |
+5V Operating: 1.3A |
| +5V |
1.7A |
|
| Operating Temperature |
32°F....158°F
(0°C....70°C)
|
| Storage Temperature |
-40°F....212°F
(-40°C....100°C)
|
| Relative Humidity, noncondensing |
0%....90% |
|
| Safety/Approvals |
Meets CE standards |