|
| System Bus |
PXI (3U) |
| Bus Information |
Bus Standards Compliance |
PICMG 2.0
PXI 2.0
PXI 2.2 |
System Bus Details |
Multiple PXI cards synchronized through PXI trigger bus | | Card Backplate |
3U PXI / CompactPCI |
| Mounting Configuration |
Internal card |
| On-Board Memory Buffer |
8K samples |
| Product Features |
Analog Input for D/A Feedback
Channels: 8
On-Bd Memory Buffer: 2K samples
Converter Resolution: 14-bit
Converter Sampling Rate: 400 kS/s
Converter: LTC1416
Data Transfers: Programmed I/O, bus-mastering DMA with scatter/gather
Unipolar Input: 0 to +10V
Bipolar Input: -10V to +10V
Gain Error: Before Calibration: ±0.4% of output max. After Calibration: ±1mV of output max.
Offset Error: Before Calibration: ±40mV max. After Calibration: ±1mV max.
Input Coupling: DC
Input Impedance: 1 Gohm/6 pF
Output Protection: Continuous ±35VDC max.
Trigger Sources: Software, external digital/analog trigger, PXI trigger bus
Trigger Modes: Post-trigger, delay-trigger, & repeated trigger
|
|
| Number of Analog Output (D/A) Channels |
4 |
| D/A Chipset |
AD7945 |
| D/A Converter |
Resolution |
12-bit |
Update Rate, All Channels, max |
1MHz | Settling Time, max. |
3µs to ±0.5 LSB accuracy | | Bipolar Output Ranges |
-10V to +10V |
| Unipolar Output Ranges |
0 to +10V |
| Output Range Selection |
Software |
| Output Range Details |
Trigger Sources:
- S/W
- External digital or analog
- PXI trigger bus
Trigger Modes:
- Post-trigger
- Delay-trigger
- Repeated-trigger
|
| Current Limit |
±5 mA |
| Built-In Reference Voltages |
+10V
Input for user-supplied ref. voltage (+10V to -10V, AC or DC) |
| Accuracy |
Gain Error |
- Before Calibration: ±0.8% of max. output
- After Calibration: ±0.02% of max. output
|
Offset Error |
- Before Calibration: ±80mV
- After Calibration: ±2mV
| Slew Rate |
20 V/µs | | Power-On State |
0 volts |
| Output Impedance |
100mΩ |
| Capacitive Loads |
Passive loads up to 1500 pF |
| Output Protection |
Continuous short to ground |
|
| Number of User Channels |
2 |
| Counter/Timer Size |
16-bit |
| Input Frequency, max. |
10Hz |
| Counter Type(s) |
Up/down counter |
| Clock Source(s) |
internal clock or external clock up to 10MHz |
| Counter/Timer Special Features |
TTL / CMOS compatible |
|
| Number of I/O Lines |
24 |
| Digital I/O Details |
TTL / CMOS compatible |
| Primary Digital I/O |
Configuration |
24 bidirectional (three 8-bit ports) |
Digital I/O Chipset |
82C55A | Input/Output Selection |
Software | Inputs |
Input Voltage - High (Vih, DC) |
2V....5V | Input Current, High (Iih) |
20μA | Input Voltage - Low (Vil) |
0mV....0.8V | Input Current, Low (Iil) |
0.2mA | Outputs |
Output Voltage - High (Voh) |
2.7V....5V | Output Voltage - Low (Vol) |
0mV....0.5V | Output Current Sink, max. |
8mA | |
| Operating System Compatibility |
Windows XP
Windows NT
Windows 2000
Windows 98
Linux
Windows Server 2003 |
| Software Compatibility |
Agilent VEE®
DaqBench
LabVIEW®
ActiveX®
MATLAB |
|
| Connector #1 |
Quantity |
1 |
Type |
68-conductor (VHDC68 0.8mm very high density Centronics, thumbscrews) | Gender |
Female (socket) | Location |
Backplate of board | |
| Power Consumption (typical) |
+5V @ 1.6A typ. |
| +5V |
1.6A |
|
| Operating Temperature |
32°F....131°F
(0°C....55°C)
|
| Storage Temperature |
-4°F....158°F
(-20°C....70°C)
|
| Relative Humidity, noncondensing |
5%....95% |
|
| Safety/Approvals |
Meets CE standards |
|
| Card Length |
6.82"
(173.23mm)
|
| Card Height |
3.94"
(100.08mm)
|
| Card Thickness |
0.8"
(20.27mm)
|
| Dimension Details |
CompactPCI, PXI, & 3U European form factor compliant
Length:
- End of PXI connector to inner back plate: 173.23mm
- End of PXI connector to end of latch: 209.07mm
- Board edge (in-board) to inner back plate: 159.78mm
Card Thickness:
- Back plate: 20.27mm
- PXI connector: 12.13mm
- Board, tallest component: 17.38mm
Card Height:
- Card height, inner board: 100.08mm
- Backplate height: 120.12mm form factor compliant
|
|
| Weight |
0.49lbs
(222.26g
)
|