|
| System Bus |
PCI (32-bit, 5V keyed) |
| Designed to Replace |
Connector and software compatible with our ISA-based CYCTM 05 |
| Card Backplate |
Standard (12cm) backplate |
| Mounting Configuration |
Internal card |
|
| Number of I/O Lines |
16 |
| Primary Digital I/O |
Configuration |
8 inputs
8 outputs |
Digital I/O Chipset |
Output: 74ACT273, Input: 74LS373 | Input/Output Selection |
Fixed | Signal Connector |
On DB-37M connector | Inputs |
Input Voltage - High (Vih, DC) |
2V....5V | Input Voltage - Low (Vil) |
-0.5V....0.8V | Outputs |
Output Voltage - High (Voh) |
3.94V....5V | Output Voltage - Low (Vol) |
0mV....0.36V | Output Current Sink, max. |
24mA | Power-On State |
DIO power on and Reset to TTL low | Digital Output Features |
- Output High: 3.94V min. @ -24mA (Vcc = 4.5)
- Output Low: 0.36V max. @ 24mA (Vcc = 4.5)
| |
| Number of User Channels |
5 |
| Counter/Timer Size |
16-bit |
| Input Frequency, max. |
6.8MHz |
| Counter Type(s) |
Up/down counter |
| Counter/Timer Chip |
AM9513 or equivalent |
| Clock Source(s) |
- Internal: Terminal count of previous counter, X2 clock source divided by 1, 10, 100, 1000, or 10000
- External: Counter 1-5 clock inputs, counter 1-5 gate inputs, software selectable
|
| Signals |
Input Voltage - High (Vih) |
2.2V....5V |
Input Voltage - Low (Vil) |
-0.5V....0.8V | Output Voltage - High (Voh) |
2.4V....5V | Output Voltage - Low (Vol) |
0mV....0.4V | | Pulse Width, High, min. |
70ns |
| Pulse Width, Low, min. |
70ns |
| Gate Width, High, min. |
145ns |
| Gate Width, Low, min. |
145ns |
| Cascadable Counters |
Yes |
| Counter/Timer Special Features |
- Based on 9512 series counter chip
- Output Voltage, High: 2.4V @ -200µA
- Output Voltage, Low: 0.4V @ 3.2mA
- Crystal Oscillator Frequency: 10MHz
- Crystal Oscillator Accuracy: 50ppm
|
|
| Operating System Compatibility |
Windows NT |
| Software Compatibility |
Labtech NOTEBOOK®
Universal Driver Library
Agilent VEE®
Labtech CONTROL®
Labtech NOTEBOOKpro®
Labtech CONTROLpro®
LabVIEW® |
|
| Connector #1 |
Quantity |
1 |
Type |
DB-37 (37-pin) | Gender |
Male (pin) | Location |
Backplate of board | |
| Power Consumption (typical) |
+5V @ 307mA typ., 550mA max. (Does not include power consumed through the I/O connector) |
|
| Operating Temperature |
32°F....122°F
(0°C....50°C)
|
| Storage Temperature |
-4°F....158°F
(-20°C....70°C)
|
| Relative Humidity, noncondensing |
0%....90% |
|
| Card Length |
5.21"
(132.3mm)
|
| Card Height |
4.2"
(106.7mm)
|
| Card Thickness |
0.57"
(14.5mm)
|