CyberResearch Home 1-800-341-2525 HomeProductsLive HelpPrintClose Window
Home  Data Acquisition & Control Systems  Terminal Panels / Breakout Panels  Analog Signal Conditioning
C5B Modules Mount Into Any Standard 5B Backplane
C5B Modules Mount Into Any Standard 5B Backplane
C5B 47-B11

5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, B-Type, +500° to +1800°C Input, 0V to +5V Output

Qty   Price (with options selected)
Shipping: 1-2 weeks
 Features
System Bus5B Series
Number of Channels1
Number of Analog Output (D/A) Channels1
Number of I/O Lines1
 
Introduction

Each C5B 47 thermocouple input module provides a single channel of thermocouple input which is filtered, isolated, amplified, and converted to a high-level analog voltage output. This voltage output is logic-switch controlled, allowing these modules to share a common analog bus without the requirement of external multiplexers.

The C5B 47 modules are designed with a completely isolated computer-side circuit which can be floated to ±50V from Power Common (pin 16). This complete isolation means that no connection is required between I/O Common and Power Common for proper operation of the output switch. If desired, the output switch can be turned on continuously by simply connecting pin 22, the Read-Enable pin, to I/O Common (pin 19).

The C5B 47 can interface with eight industry-standard thermocouple types. Its corresponding output signal operates over a 0V to +5V range. Each module is cold-junction compensated to correct for parasitic thermocouples formed by the thermocouple wire and screw terminals on the mounting panel. Upscale open thermocouple detect is provided by an internal pull-up resistor. Downscale indication can be implemented by installing an external 47 megohm resistor (±20% tolerance) between screw terminals 1 and 3 on the C5BP panels.

Signal filtering is accomplished with a six-pole filter, which provides 95dB of normal-mode-rejection at 60Hz and 90dB at 50Hz. Two poles of this filter are on the field side of the isolation barrier, and the other four are on the computer side.

After the initial field-side filtering, the input signal is chopped by a proprietary chopper circuit. Isolation is provided by transformer coupling, again using a proprietary techniques to suppress transmission of common mode spikes or surges. The module is powered from ±5VDC (±5%).

A special input circuit on the modules provides protection against accidental connection of power-line voltages up to 240VAC.

  Less Detail  More Detail
Product Information
System Bus 5B Series
Mounting Configuration Plug-in module (requires a backplane)
Module Mounting Compatibility 5B series
Analog Input Channels
Number of Channels 1
Differential Channels 1
Bandwidth 4Hz
Speed/Bandwidth Details Bandwidth, -3dB: 4Hz
Accuracy Temperature Drift +/-1 microvolt/°C
Accuracy Details ±0.15%, ±2.0°C (includes nonlinearity, hysteresis, and repeatability; does not include CJC accuracy)
Noise CMRR (Common Mode Rejection Ratio) 160dB, 50Hz or 60Hz
NMRR (Normal Mode Rejection Ratio) 95dB @ 60Hz, 90dB @ 50Hz
Noise 0.1 to 10Hz: 0.2 microvolts rms
Input Impedance 50MΩ
Input Impedance Details Power off: 40 kilohms; overload: 40 kilohms
Input Protection Protected against field voltages to 240Vrms, max.
Field side can be offset +/-50V differential from power common
Input Ranges
Thermocouple Support Thermocouple Inputs B-type thermocouple
Temperature Range(s) +500° to +1800°C
Isolation, Field-to-Logic 1500Vrms
Isolation Details 1500Vrms transformer isolation
Trigger Modes
Triggering Type(s) Supported External pulse trigger (triggered by pulse on trigger input)
Analog Output Channels
Number of Analog Output (D/A) Channels 1
Unipolar Output Ranges 0 to +5V
Current Limit +8mA
Accuracy Temperature Drift +/- 20 microvolts/°C
Noise 100kHz: 300 microvolts p-p, 150 microvolts rms
Output Impedance 50Ω
Output Protection Continuous short to ground
Digital I/O Lines
Number of I/O Lines 1
Configuration Output enable control/input
Inputs Input Voltage - High (Vih, DC) 2.4V....36V
Input Current, High (Iih) 0.5μA
Input Voltage - Low (Vil) 0mV....0.8V
Input Current, Low (Iil) 0.5μA
Digital Input Features Trigger voltage accomodates signals of 2.4VDC to 36VDC
Connector Pinout Standard 5B series (26-pin)
Cables and Connectors
Connector #1 Quantity 1
Type 26-pin 5B-standard
Gender Male (pin)
Location On module
Construction
Construction Material Plastic
Power
Power Consumption (typical) 30mA @ 4.75 to 5.25VDC
+5V 30mA
Environmental Specifications
Operating Temperature -40°F....185°F (-40°C....85°C)
Storage Temperature -40°F....185°F (-40°C....85°C)
Relative Humidity, noncondensing 0%....95%
Safety & Standards Compliance
Safety/Approvals Meets CE standards
CSA certified
Dimensions
Width 0.6" (15.24mm)
Height 2.28" (57.91mm)
Depth 2.26" (57.4mm)
Less Detail Less Detail
 
Ordering - Includes Options Indicated Below
C5B 47-B11
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, B-Type, +500° to +1800°C Input, 0V to +5V Output
$240.00
C5B 47-E08
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, E-Type, 0° to +1000°C Input, 0V to +5V Output
$240.00
C5B 47-J01
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, J-Type, 0° to +760°C Input, 0V to +5V Output
$240.00
C5B 47-J02
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, J-Type, -100° to +300°C Input, 0V to +5V Output
$240.00
C5B 47-J03
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, J-Type, 0° to +500°C Input, 0V to +5V Output
$240.00
C5B 47-J12
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, J-Type, -100° to +760°C Input, 0V to +5V Output
$240.00
C5B 47-K04
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, K-Type, 0° to +1000°C Input, 0V to +5V Output
$240.00
C5B 47-K05
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, K-Type, 0° to +500°C Input, 0V to +5V Output
$240.00
C5B 47-K13
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, K-Type, -100° to +1350°C Input, 0V to +5V Output
$240.00
C5B 47-K14
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, K-Type, 0° to +1200°C Input, 0V to +5V Output
$240.00
C5B 47-N15
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, N-Type, -100° to +1300°C Input, 0V to +5V Output
$240.00
C5B 47-R09
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, R-Type, +500° to +1750°C Input, 0V to +5V Output
$240.00
C5B 47-S10
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, S-Type, +500° to +1750°C Input, 0V to +5V Output
$240.00
C5B 47-T06
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, T-Type, -100° to +400°C Input, 0V to +5V Output
$240.00
C5B 47-T07
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, T-Type, 0° to +200°C Input, 0V to +5V Output
$240.00

Terminal Panel Options
None  
C5BP 01
Mounting Panel for 16 C5B Series Modules
$446.00
C5BP 01-DIN
DIN Mounting Panel for 16 C5B Series Modules
$475.00
C5BP 02
Mounting Panel for 16 C5B Series Modules, Multiplexing
$465.00
C5BP 02-DIN
DIN Mounting Panel for 16 C5B Series Modules, Multiplexing
$496.00
C5BP 05
Mounting Panel for 8 C5B-Series Modules
$331.00
C5BP 03-DIN
DIN Mounting Panel for 1 C5B Series Module
$76.00
C5BP 04
Mounting Panel for 2 C5B Series Modules
$88.00
C5BP 04-DIN
DIN Mounting Panel for 2 C5B Series Modules
$105.00
C5BP 05-DIN
DIN Mounting Panel for 8 C5B Series Modules
$346.00
C5BP 06
Mounting Panel for 8 C5B Series Modules, Multiplexing
$348.00
C5BP 06-DIN
DIN Mounting Panel for 8 C5B Series Modules, Multiplexing
$363.00
C5BP EV
Evaluation Mounting Panel for 1 C5B Series Module
$126.00
TPB DIN26
26-Pin DIN-Mount Barrier Strip Terminal Panel, Spade Lug Screw Terminals
$86.00
INST 326HM
26-Pin DIN-Mount Screw Terminal Block, 26-Pin M Header Connector
$119.00
C5BP 03
Mounting Panel for 1 C5B Series Module
$61.00

Cable Options
None  
5BP CBL
Custom Cable from C5BP Series Panels to DAS Board, 6 ft
$59.00
5BP CBX
Daisy-Chaining Cable to Additional C5BP 02/06 Panel
$59.00
CBL 2602
26-Pin Ribbon Cable, 26-Pin F-F header, 2 ft
$25.00
Catalog # Shipping Price (with options) Qty  
C5B 47-B11 1-2 weeks
Customers Were Also Interested In These
C5B 47-S10 $240.00
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, S-Type, +500° to +1750°C Input, 0V to +5V Output
C5B 47-N15 $240.00
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, N-Type, -100° to +1300°C Input, 0V to +5V Output
C5B 47-J01 $240.00
5B Signal Conditioning Module - Isolated Linearized Thermocouple Input, J-Type, 0° to +760°C Input, 0V to +5V Output
Did you find this page useful?
Toll-Free Hotline 1-800-341-2525 • (203) 643-5000 • Fax: (203) 643-5001
©Copyright 2013 , CyberResearch Inc., Branford, CT USA All Rights Reserved