4CYCTM 10H - PC/104 Counter/Timer Module - 10 Channels

Home

Data Acquisition & Control Systems

Digital I/O Interfaces

Counter/Timer Products

PC/104 High-Precision Counter/Timer Module with 10 Channels

4CYCTM 10H
PC/104 Counter/Timer Module - 10 Channels
Qty	Price (with options selected)
Shipping: Low Stock

Features

	System Bus		PC/104
	Number of User Channels		10

Introduction

PC/104 modules from CyberResearch offer advantages not found in PC/104 modules from other suppliers. For example, compatibility with industry standards means more accessory products are available, including cabling and terminal panels at reasonable prices. Existing compatible software means less programming, while allowing you to easily replace systems that use full-size ISA boards with compact yet powerful PC/104 systems.

The 4CYCTM 10H packs power and flexibility into a small package. It can be configured for frequency measurement or division, event counting, pulse-width measurement, and complex duty-cycle generation. It supports one-shot and continuous mode, and the module is supported under CYDAS UDR and other third party programs available from CyberResearch.

4CYCTM 10HX is a high-precision counter/timer version of the module. It uses a 50ppm crystal (the 4CYCTM 04H uses a 100 ppm crystal).

			Less Detail

Product Information
System Bus		PC/104
Mounting Configuration		Internal card Stacking module or daughterboard
Counter/Timer Channels
Number of User Channels		10
Counter/Timer Size		16-bit
Input Frequency, max.		7MHz
Clock Source(s)		1MHz, 5MHz, or external clock source, software selectable.
Accuracy		100ppm for 4CYCTM 10H, 50ppm for 4CYCTM 10HX
Signals	Input Voltage - High (Vih)	2.2V....5V
	Input Voltage - Low (Vil)	-0.5V....0.8V
	Output Voltage - High (Voh)	2.4V....5V
	Output Voltage - Low (Vol)	0mV....0.4V
Pulse Width, High, min.		70ns
Gate Width, High, min.		145ns
Cascadable Counters		Counters may be cascaded to provide larger counting limits.
Counter/Timer Special Features		Two 9513 devices, 5 counters per device, 16 bits each High Pulse Width (clock input): 70ns min. Cycle Time (clock input): 145ns min.
Software
Software Included Free with Product		Diagnostic software Setup_utility software
Operating System Compatibility		Windows XP Windows NT Windows 2000 Windows 98 Windows 95 Windows 3.x Windows 98SE
Software Compatibility		Labtech NOTEBOOK® Snap-Master® Universal Driver Library Agilent VEE® DASYLab® Labtech CONTROL® Labtech NOTEBOOKpro® Labtech CONTROLpro® DASYLab Lite® LabVIEW®
Cables and Connectors
Connector #1	Quantity	1
	Type	50-pin header (IDC)
	Gender	Male (pin)
Power
Power Consumption (typical)		225mA typical, 300mA max. @ +5VDC
+5V		300mA
Environmental Specifications
Operating Temperature		32°F....122°F (0°C....50°C)
Storage Temperature		-4°F....158°F (-20°C....70°C)
Relative Humidity, noncondensing		0%....90%
Safety & Standards Compliance
Safety/Approvals		Meets CE standards Meets EMC Directive 89/336/EEC
Weight
Weight		0.31lbs (141.75g )

Less Detail

Ordering - Includes Options Indicated Below

	4CYCTM 10H PC/104 Counter/Timer Module - 10 Channels	$245.00
	4CYCTM 10HX PC/104 High-Precision Counter/Timer Module - 10 Channels, 50 ppm crystal	$295.00

Catalog #	Shipping	Price (with options)	Qty
4CYCTM 10H	Low Stock

Customers Were Also Interested In These


	4CYCTM 10HX	$295.00
	PC/104 High-Precision Counter/Timer Module - 10 Channels, 50 ppm crystal


	CYCTM 05P	$245.00
	PCI Counter/Timer Board - 5 Channels of 16-Bit C/T, 16 Channels of DIO


	CYCTM 05X	$295.00
	ISA Counter/Timer Board - 5 Channels of 16-Bit C/T, 16 Channels of DIO, High-Accuracy (50ppM)

Did you find this page useful?

Toll-Free Hotline 1-800-341-2525 • Tel: 203-483-8815 • Fax: 203-483-9024