ADAM 4018P - 8 Channel Thermocouple Input Module with Modbus

Home

Data Acquisition & Control Systems

Modular / Remote Data Acquisition

CYMOD & ADAM Modules

You Can Easily Panel-Mount, DIN Rail-Mount, or Piggyback-Mount Modules

ADAM 4018P
ADAM Remote Data Acquisition Module - 8 Channels of 16-bit A/D with Thermocouple Support, Modbus Compliant
Qty	Price (with options selected)
Shipping: Call for Availability

Features

	System Bus		RS-422/485 serial
	Number of Channels		8
	A/D Converter Resolution		16-bit
	Max. A/D Speed (throughput)		10Hz

Introduction

There are four ADAM™ modules that accept thermocouple inputs. All four accept J, K, T, E, R, S, & B-type thermocouples, and all provide 3000VDC isolation.

ADAM 4011 has one differential input with 2 megohms impedance.
ADAM 4019 has 8 differential inputs with 20 megohms impedance, and it accepts Modbus inputs.
ADAM 4018 has 6 differential plus 2 single-ended inputs with 20 megohms impedance.
ADAM 4018M adds a data logger to ADAM 4018.

ADAM modules use a single twisted pair of wires to transmit and receive data. All module commands are issued in printable ASCII characters. You can easily panel-mount, DIN-rail-mount, or piggyback-mount modules. Removable screw terminal connectors make wiring and field maintenance easy.

Modules accept any unregulated power source between 10 and 30 VDC. A watchdog timer supervisory function automatically resets the modules in the event of system failure.

Our CyMOD series of modules has been designed with state-of-the art surface-mount technology to be completely hardware and software compatible with the ADAM series, at a somewhat lower cost. CM 4011 and CM 4018 are thermocouple modules that parallel the similarly numbered ADAM modules.

				Less Detail

Product Information
System Bus		RS-422/485 serial
Bus Information	Baud Rate, Max.	115.2 kbps
Mounting Configuration		Desktop / benchtop Wall-mount External module DIN-rail mount
Direct Sensor Input		Thermocouple
On-Board FIFO Memory Buffer		1 sample per channel
On-board Microprocessor		Yes
Analog Input Channels
Number of Channels		8
Differential Channels		8
A/D Converter Resolution		16-bit
Max. A/D Speed (throughput)		10Hz
Typ. A/D Speed (throughput)		10Hz
A/D Converter Settling Time		100ms
Bandwidth		15.72Hz
A/D Speed/Bandwidth Details		13.1Hz @ 50Hz; 15.72Hz @ 60Hz
Accuracy	Relative Accuracy	±0.01% for voltage input
	Zero Drift	±3mV/°C
Noise	CMRR (Common Mode Rejection Ratio)	92dB min.
Input Impedance		20MΩ
Input Protection		Protected against voltages to +/-35VDC, max. with power on
A/D Special Features		Microprocessor has seven basic functions: Linearization of T/C (Thermocouples) Communication software and command set Calibration software Alarm monitoring Event counting Management of the EEPROM device that holds the system parameters Data transformation
Input Ranges
Current Input Ranges		4 to 20mA
Thermocouple Support	Thermocouple Inputs	J-type thermocouple K-type thermocouple T-type thermocouple E-type thermocouple R-type thermocouple S-type thermocouple B-type thermocouple
	J-type Range Supported	32°F....1400°F (0°C....760°C)
	K-type Range Supported	32°F....2498°F (0°C....1370°C)
	T-type Range Supported	-148°F....752°F (-100°C....400°C)
	E-type Range Supported	32°F....1832°F (0°C....1000°C)
	R-type Range Supported	932°F....3182°F (500°C....1750°C)
	S-type Range Supported	932°F....3182°F (500°C....1750°C)
	B-type Range Supported	932°F....3272°F (500°C....1800°C)
A/D Range Selection		Software
Input Range Details		Software configurable for T/C, low-level voltage or mA inputs
Isolation, Field-to-Logic		3000VDC
Trigger Modes
Triggering Type(s) Supported		Software trigger (software-controlled trigger)
Software
Software Included - Features		Setup and utility software included
Operating System Compatibility		Windows NT Windows 2000 Windows 98 Windows 95
Software Compatibility		Labtech NOTEBOOK® DASYLab® GENIDaq Labtech CONTROL® Labtech NOTEBOOKpro® Labtech CONTROLpro® DASYLab Lite® LabVIEW®
Cables and Connectors
Connector #1	Quantity	20
	Type	Screw terminals as removable (lift-off) terminal strips
	Location	On module
Connector & Cabling Details		4 terminals for RS-422/485 data, DC supply voltage, and ground. One terminal can reset module to default address/baud rate. Other 15 terminals are used for A/D input channels and analog ground.
Construction
Construction Material		Impact resistant ABS plastic
Power
Power Consumption (typical)		0.8W
Power Supply Notes		Power Requirements: Unregulated +10 to +30VDC
System Monitoring
Watchdog Timer Included		Yes
Watchdog Timer Intervals		100ms to 100 seconds in 0.1-second intervals
Environmental Specifications
Operating Temperature		32°F....158°F (0°C....70°C)
Relative Humidity, noncondensing		0%....95%
Safety & Standards Compliance
Safety/Approvals		Meets CE standards
Dimensions
Width		2.76" (70mm)
Height		1.65" (42mm)
Depth		4.83" (122.6mm)
Dimension Details		Height: 1" (25mm) without removable DIN-rail mounting bracket. Wall-mount bracket (included) adds 6.2mm (31.2mm height w/steel wall-mount bracket).

Less Detail

Ordering - Includes Options Indicated Below

	ADAM 4018 ADAM Remote Data Acquisition Module - 8 Channels of 16-bit A/D with Thermocouple Support	$315.00
	ADAM 4018P ADAM Remote Data Acquisition Module - 8 Channels of 16-bit A/D with Thermocouple Support, Modbus Compliant	$425.00

Driver Software Options
	None
		PCL LV LabVIEW® Controls for Win95/98/200/NT	$0.00
		PCL OCX ActiveX® Controls for Win95/98/NT	$0.00
		ADAM OPC ADAM OPC Server Software for Win98/NT/2000/XP	$225.00

Power Supply Options
	None
		CM 243 24VDC Power Supply, 72W, Provides 3A @ 24V from 110/220VAC	$125.00

Catalog #	Shipping	Price (with options)	Qty
ADAM 4018P	Call for Availability

Customers Were Also Interested In These

Did you find this page useful?

Toll-Free Hotline 1-800-341-2525 • (203) 643-5000 • Fax: (203) 643-5001

ADAM Remote Data Acquisition Module - 8 Channels of 16-bit A/D with Thermocouple Support, Modbus Compliant