|
| Motor Type |
2-phase stepping motor |
| Motor Size |
NEMA Size 23 |
| Shaft Type |
Single-shafted |
| Holding Torque |
160 oz-in |
| Motor Speed (max sps @ 20% load) |
7,500 |
| Rotor Inertia |
1.64 oz-in² (300 x 10-7 kg-m²) |
|
| Number of Wires (leads) |
8 wires |
| Wire Gauge (AWG) |
24 AWG |
| Current Per Phase (series) |
1.5A |
| Current Per Phase (bipolar parallel) |
2.9A |
| Nominal Voltage (bipolar series) |
2.6VDC |
| Winding Resistance per Phase |
0.9Ω |
| Winding Inductance per Phase |
2.5mH |
| Electrical Details |
Voltage, Resistance, and Inductance measurements indicated are for Parallel Operation. Current (Amps) specifications are given in both Series and Parallel configurations. |
|
| Operating Temperature |
32°F....158°F
(0°C....70°C)
|
| Storage Temperature |
32°F....212°F
(0°C....100°C)
|
| Other Environmental Specifications |
The motor is designed to operate at a case temperature of up to 212°F (100°C); the coils are designed to withstand temperatures up to 266°F (130°C). |
|
| Width |
2.22"
(56.39mm)
|
| Height |
2.22"
(56.39mm)
|
| Length of Body |
2.13"
(54.1mm)
|
| Depth |
2.92"
(74.17mm)
|
| Shaft Length (Main Shaft) |
0.73"
(18.54mm)
|
| Shaft Diameter |
0.25"
(6.35mm)
|
| Keyed Shaft Details |
.228 inch (shaft diameter measured perpendicular to flat of key) Keyed shaft, Key runs .59 inch from shaft's free end. Single key surface. |
|
| Weight |
1.55lbs
(703.07g
)
|
