|
| Product Type |
Motion controller
Motor driver | | System Bus |
RS-422/485 serial | | Features |
| | More Info |
- Isolated Logic Inputs: Limit A, Limit B, Home, Party
- Serial I/O Baud Rate: 9600 baud, RS-422/485
- Step Frequency: 10MHz max.
- Motor Speed: 0 to 6000 rpm
- Step Resolutions (1.8°/step): Auto-variable, 200, 400, 800, 1000, 1600,
2000, 3000, 5000, 6400, 10000, 12800, 25000, 25600, 50000, 51200 per revolution
- Digital I/O Lines (user-defined): 3 inputs (0 to +5VDC) and 3 outputs (0 to
+5VDC)
- Digital I/O Lines (dedicated): Go, Jog+, Jog-, Jog Speed, and Soft Stop (0
to +15VDC)
- Position Counter: ±8.388.607.99
- Nonvolatile Memory: 2kBytes
- Protection: thermal thermal, 0 to 0, 0 to ground, and 0 to +VBUS
short circuit
- European 3U Rack-Mount Chassis: 5.06" case style
- LED Indicators: Power and fault status
| | Microcontroller |
Built-in indexer (stepping controller) allows you, via a serial link, to program
parameters such as acceleration/deceleration ramps, velocity, position,
resolution, drive current, etc., to form simple or complex motions. Programs can
be executed by sending single commands, or can be stored in the on-board
nonvolatile memory, which can then be executed on power-up or by discrete user
inputs. The Panther indexer has a variety of built-in functions, including a
homing algorithm and limit switch handling, as well as general-purpose inputs
and outputs that can be used to detect switch closures or to activate solenoids
and other external devices. | | Color |
Beige
Black | |
| Input Voltage Range(s) |
90...128VAC | | Input Current |
0.4 to 3A (rms), 4A (peak) |
|
Detailed Specifications  |
| |
|
|
|