|
| Backplane Type |
Quad-System PICMG backplane |
| Number of Individual Systems |
4 systems |
| Expansion Slots (max. # of cards) |
16 slots |
| Slot Qty. of Typical Chassis |
20 slots |
| Max. Number of PCI Cards |
12 |
| Max. Number of ISA Cards |
4 |
| PC Board Construction |
Noise resistant 4-layer PC board |
| Backplane Special Features |
- Backplane has 2 sets of P8/P9 power connectors for 1 or 2 power supplies. Simply remove jumpers to split the power bus, powering the left 2 systems from one supply, and the right two systems from another power supply.
- Due to dimensions and hole patterns, the backplane may not fit all 10-slot chassis. Please feel feel to consult our application engineers for the best backplane/SBC/chassis combination for your application.
|
|
| PICMG Slots (for PICMG CPU card) |
4 PICMG slots |
| Shared PICMG (use for PICMG or PCI or ISA card) |
4 PICMG/PCI/ISA slots |
| PCI Slots |
Number of PCI Slots |
8 PCI slots |
Type of PCI Slots |
32-bit 5V standard (notch farthest from backplate) | | Expansion Slots Features |
Provides 4 individual 4-slot systems. Unused PICMG slot may be used as an ISA slot. |
|
| Power Input Connector(s) |
20-pin ATX male connector
5 screw terminals
Two sets of P8/P9 standard AT power connectors (two pairs of 6-wire connectors)
P8-style aux. power connector (6-wire, 3.3V/GND) |
| Backplane Filter Power Connectors |
PS/2 (P8/P9)
ATX
Screw terminals |
| ATX Power Control |
2-pin header for ATX power control |
| Power Indicators |
+12V |
LED on card |
-12V |
LED on card | +5V |
LED on card | -5V |
LED on card | +3.3V |
LED on card | |
| Fan Power Connector(s) |
Standard 4-pin Molex connector (female) |
| Pass-Through Connectors |
Keyboard Signal Pass-Throughs |
4 sets of three 5-pin male headers wired in parallel |
|
| Safety/Approvals |
Meets CE standards |
|
| Width |
16.38"
(416mm)
|
| Depth |
10.28"
(261mm)
|
| Card Thickness |
0.79"
(20mm)
|
|
| Weight |
1.88lbs
(852.75g
)
|