SRP IBR12 - SRP IBR12 Rack-Mount Surge Protector, 12-Outlet, 120VAC, 50/60Hz

Home

Industrial Computers

PC Accessories

Power Conditioning & Protection

Surge Protectors

12-Outlet Rack-Mount Surge Suppressor, Front

SRP IBR12
SRP IBR12 Rack-Mount Surge Protector, 12-Outlet, 120VAC, 50/60Hz
Qty	Price (with options selected)
Shipping: Low Stock

Features

	Mounting Configuration		Rack-mount (EIA RS-310C Standard 19"); Wall-mount
	Power Supply Output Connector		12 AC outlets; 10 on rear panel, 2 on front panel (NEMA 5-15R)
	Nominal Output Power		1.8kW
	Safety/Approvals		Meets UL 1449 standards; Meets UL 1363 standards; Meets IEEE-587 standards for categories A & B; UL Certified Recognized Component ("RU" mark); UL Recognized Component, Certified in Canada & USA ("cRUus" mark); CSA certified

Introduction

This 12-outlet industrial surge protector makes it easy to organize power in your rack. The illuminated power switch on the front panel lets you control 1800W of power to your rack-mount equipment while simultaneously protecting it against transient power spikes and surges. A protective cover over the power switch prevents accidental shut-off.

Eight of the outlets have 40dB of noise suppression (2 in front, 6 in back, black), while 4 of the rear outlets (white) provide enhanced 80dB noise suppression for sensitive equipment.

A combination of metal oxide varistors (MOVs), toroidal balanced chokes, and VHF capacitors stabilize incoming power and provide normal-mode (H-N) and common-mode (N-G / H-G) line surge suppression.

Thermal fusing helps prevent unsafe conditions during extreme extended overvoltages and catastrophic occurances. Conforms with IEEE 587 / ANSI C62.41 specifications. A 15A circuit breaker (easily reset via pushbutton on front panel) protects against overload conditions and short-circuits in connected equipment.

			Less Detail

Chassis
Mounting Configuration		Rack-mount (EIA RS-310C Standard 19") Wall-mount
Height, Rack Units		1U (1.75")
Construction - Chassis Material		Heavy-duty steel chassis
Mounting Flanges		Removable wall/bench-mount flanges included
Color	Color	Black
	Font Panel Color	Black
Indicators, Switches, & Controls
Front Panel Controls	Power On/Off Switch	1, with protective cover
	Other Controls/Features	Lighted power switch confirms power on/off status. Power switch has a protective cover to prevent accidents. Circuit-breaker reset push-button mounted on front. 3 LED's on front show Protection Present, Line Fault, and Line OK.
Indicators	Power On/Off	Illuminated power switch
	Power Supply Status/Alarm	3 LEDs on front panel
	Input Power Status	Illuminated power switch
	Other Indicators	Fault
Connectors
Power Supply Input Connector		NEMA/USA standard male plug
Power Supply Output Connector		12 AC outlets; 10 on rear panel, 2 on front panel (NEMA 5-15R)
Cables
Power Cord Included		Integral 12-ft USA power cord
Power
Nominal Output Power		1.8kW
Power Supply Input Type		AC
UPSs/Inverters & Power Conditioning
Surge Suppression Response Time		1ns
Power Protection Special Features		Suppresses transient spikes up to 60,000 amps / 750 joules / 140V maximum 12 AC outlets, 2 in front, 10 in back Noise suppression: 8 outlets at 40dB (black), 4 outlets at 75dB (white) Circuit breaker rated at 15A (1875 watts) total load.
Dimensions
Width, Rack-Mount		EIA RS-310C standard 19 inches at flanges
Height, Rack Units		1U (1.75")

Less Detail

Ordering - Includes Options Indicated Below

SRP IBR12
SRP IBR12 Rack-Mount Surge Protector, 12-Outlet, 120VAC, 50/60Hz

$149.00

Catalog #	Shipping	Price (with options)	Qty
SRP IBR12	Low Stock

Customers Were Also Interested In These

Did you find this page useful?

Toll-Free Hotline 1-800-341-2525 • Tel: 203-483-8815 • Fax: 203-483-9024