| Can be used to extend an ATX power supply cable by 17". This cable is actually a "Y" cable, which splits a 20-pin male ATX power connector into two 17" cables; one of these cables ends in a 20-pin female ATX connector, the other cable ends in a 12-pin female industrial backplane connector. NOTES ON USAGE: The ridge on the 12-pin connector normally faces up. The 12-pin connector is the type found on our many of our PBPN and PBPW backplanes for 20-slot systems. Its pinout is, from left-to-right/pin 12 to pin 1:
+5V (red), +5V, +5V, -5V (white), GND, GND, GND, GND, -12V (blue), +12V (yellow), +5V, Power Good (orange). |