|
| Power Supply Form Factor |
Standard ATX or PS/2-size |
| Construction - Chassis Material |
Steel |
|
| Power Supply Output Type |
ATX12V |
| Nominal Output Power |
400W |
| Power Factor Correction (PFC) |
Yes |
| Power Supply Conversion Type |
Switching |
|
| Peak Output Power |
400W |
| Output Voltage(s) |
+5VDC
+12VDC
-12VDC
+3.3V
+5Vsb |
| +5V Output |
Peak Output Current |
30A |
Nom. Output Current |
15A | Min. Output Current / Load |
300mA | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
50mV (peak-to-peak) | | +12V Output |
Peak Output Current |
29A |
Nom. Output Current |
14.5A | Min. Output Current / Load |
2A | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
120mV (peak-to-peak) | | –12V Output |
Peak Output Current |
800mA |
Nom. Output Current |
400mA | Min. Output Current / Load |
0μA | Line Regulation |
-1%....1% | Load Regulation |
-10%....10% | Ripple and Noise |
120mV (peak-to-peak) | | +3.3V Output |
Peak Output Current |
30A |
Nom. Output Current |
15A | Min. Output Current / Load |
500mA | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
50mV (peak-to-peak) | | +5Vsb Output |
Peak Output Current |
2A |
Nom. Output Current |
1A | Min. Output Current / Load |
0μA | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
50mV (peak-to-peak) | | +3.3V & +5V Combined Max. Power |
152W |
| +3.3V, +5V, & +12V Combined Max. Power |
400W |
| +5V & +12V Combined Max. Power |
400W |
| Start-up time |
20ms |
| Hold-Up Time |
17ms |
| Efficiency |
80% |
| Output Power Features |
- Hold-Up Time Details: 17ms min. @ nominal input voltage
- Efficiency Details: 80% at 230Vac, 75% at 115Vac
- Power Good Signal: Powr On Delay Time: 100-500ms. Power Off Delay Time: 1ms min. (TTL & CMOS compatible)
- Leakage Current: <3.5mA @ 115VAC, 60Hz
|
|
| Power Supply Input Type |
AC |
| Nominal Input Voltage |
115/230VAC |
| Input Voltage Range(s) |
90...265VAC |
| Input Frequency |
47...63Hz |
| Input Range Selector |
Autoranging |
| Input Current |
5A @ 115VAC, 2.5A @ 230VAC |
| Inrush Current (max.) |
100A max. at cold start |
|
| Power Input Connector(s) |
NEMA standard male PC cord socket |
| Power Cord Included |
6-ft USA power cord included |
| Output Connector(s) |
Connector(s) to CPU/Motherboard |
20-pin ATX standard female connector
4-pin ATX / ATX12V additional 12V connector
ATX aux. power connector (P8-style, 6-wire, 3.3V/5V/GND) |
Length of Cable(s) to CPU/Motherboard |
19"
(482.6mm)
| Connector(s) to Drives/Accessories |
Standard Molex internal drive/device power connector (4-pin, female)
Floppy power connector (4-pin, female) | Length of Cable(s) to Drives/Accessories |
17"
(431.8mm)
| Output Connector(s) Features & Details |
Standard Molex internal drive/device power connector (4-pin, female) : 5 at 17 inches, 1 at 23 inches
Floppy power connector (4-pin, female) : 1 at 23 inches | |
| Power On/Off Switch |
1 on/off switch |
|
| Cooling Summary |
Cooling fan |
| Number of Cooling Fans |
1 |
| Cooling Fan Details (1) |
Number of fans of this type |
1 |
Cooling Fan Size |
80mm X 80mm | |
| Operating Temperature |
32°F....122°F
(0°C....50°C)
|
| Storage Temperature |
-4°F....176°F
(-20°C....80°C)
|
| Relative Humidity, noncondensing |
5%....95% |
|
| Safety/Approvals |
Meets CE standards
Meets CSA standards
Meets FCC Part 15 - Class B EMI specs
Meets VDE Class A standards
Meets CISPR22 Class B EMI specs
UL Certified Recognized Component ("RU" mark)
Meets CSA 22.2 No. 950 specs
Meets UL 1950 standards
Meets RoHS standards |
| Protection |
Overvoltage |
+3.3V output: 4.5V, +5V output: 6.5V, +12V output: 14.5V |
Short-Circuit |
Yes, on +3.3V, +5V, -5V, +12V, and -12V lines | | MTBF |
100000 hours |
| Compliance |
ATX12V |
| Power Management |
EPA Energy Star compliant |
|
| Width |
5.91"
(150mm)
|
| Height |
3.37"
(85.54mm)
|
| Depth |
6.2"
(157.53mm)
|
| Dimension Details |
Depth including inboard bracket: 157.53mm
Depth not including inboard bracket: 146.65mm |
|
| Weight |
3.51lbs
(1.59kg
)
|