 |
Home  Industrial Computers PC Accessories Power Supplies Redundant (hot-swap) Power Supplies
|
|
|
|
| Redundant Hot-Swap 300W Power Supply |
|
|
|
|
|
|
Features
|
 | Power Supply Form Factor | | n+1 redundant (standard ATX or PS/2-size) | | Power Supply Output Type | | ATX12V | | Nominal Output Power | | 300W | | Peak Output Power | | 300W | | Input Voltage Range(s) | | 90...132 or 180...264VAC |
|
|
|
|
|
Introduction
|
|
| An n+1 redundant power supply is actually two complete power supplies running in parallel. This fault-tolerant design protects you against power supply failure. Even if one module fails, the other module will keep your system up and running until you can install a replacement. You can hot-swap power modules without needing to turn off or restart your system. Be sure to order a spare PWM 300HX power module. |
|
|
|
|
|
|
| Power Supply Form Factor |
n+1 redundant (standard ATX or PS/2-size) | |
| Power Supply Output Type |
ATX12V | | Nominal Output Power |
300W | |
| Peak Output Power |
300W | | Output Voltage(s) |
+5VDC
+12VDC
-5VDC
-12VDC
+3.3V
+5Vsb | | Efficiency |
70% | |
| Input Voltage Range(s) |
90...132 or 180...264VAC | |
| Cooling Summary |
3 cooling fans | |
| Operating Temperature |
32°F....122°F
(0°C....50°C)
| |
| Safety/Approvals |
Meets CE standards
Meets TUV standards
Meets FCC Part 15 - Class B EMI specs
Meets CISPR22 Class B EMI specs
UL Recognized Component, Certified in Canada & USA ("cRUus" mark)
Meets UL 1950 standards |
|
Detailed Specifications  |
| |
|
|
|
|
|
|
|
|
|
|
|