DCD 24S - DC-to-DC Power Supply - Isolated DC Voltage Input, +24VDC @ 400mA Output, DIN Mountable

Home

Industrial Computers

PC Accessories

Power Supplies

DC Input Power Supplies

DCD 24S
DC-to-DC Power Supply - Isolated DC Voltage Input, +24VDC @ 400mA Output, DIN Mountable
Qty	Price (with options selected)
Shipping: Call for Availability

Features

	Power Supply Form Factor		External (fully enclosed)
	Power Supply Output Type		Single-output (DC output)
	Nominal Output Power		9.6W
	Peak Output Power		9.6W
	Input Voltage Range(s)		+18 to 36VDC

Introduction

Our DCD series of DC-to-DC power converters provides high-precision DC power to components that are not well suited to typical unregulated shop-floor 10-30VDC power. These converters are 83% efficient and provide output accuracy of ±2% combined with line regulation of ±0.2% and load regulation of ±0.2%. In addition, the isolation resistance of 10⁹ohm provides an isolation voltage of 1000VDC, protecting your most sensitive and valuable equipment from accidential voltage surges.

18-36VDC input, with your choice of output ranges:

DCD 24S: +24VDC @ 400mA out
DCD 12S : +12VDC @ 800mA out
DCD 05S: +5VDC @ 2A out
DCD 15D: ±15VDC @ 300mA out
DCD 05D: ±5VDC @ 1A out

				Less Detail

Case
Power Supply Form Factor		External (fully enclosed)
Form Factor Special Features		DIN rail mountable
Construction - Chassis Material		Plastic
General Specifications
Power Supply Output Type		Single-output (DC output)
Nominal Output Power		9.6W
Power Supply Conversion Type		Switching
Switching Frequency		200KHz
Output Specifications
Peak Output Power		9.6W
Output Voltage(s)		+24VDC
24V Output	Peak Output Current	400mA
	Line Regulation	-0.2%....0.2%
	Load Regulation	-0.2%....0.2%
Efficiency		83%
Output Power Features		Ripple and Noise: 100mV (peak-to-peak)
Input Specifications
Power Supply Input Type		DC
Nominal Input Voltage		+24VDC
Input Voltage Range(s)		+18 to 36VDC
Input Frequency		DC
Connectors & Cables
Power Input Connector(s)		6 screw terminals
Output Connector(s)	Connector(s) to Drives/Accessories	6 screw terminals
Indicators, Switches, & Controls
Indicators	Power On/Off	LED indicates power on
Cooling
Cooling Summary		Convection (runs in silence)
Environmental Specifications
Operating Temperature		-13°F....158°F (-25°C....70°C)
Storage Temperature		-22°F....185°F (-30°C....85°C)
Safety & Standards Compliance
Safety/Approvals		Meets CE standards
Protection	Overvoltage	Isolation voltage: 1000 Vdc Isolation resistance: 10 Gohm
	Short-Circuit	Yes
Dimensions
Width		0.96" (24.5mm)
Height		2.78" (70.5mm)
Depth		4.45" (113mm)
Weight
Weight		0.24lbs (110g )

Less Detail

Ordering - Includes Options Indicated Below

DCD 24S
DC-to-DC Power Supply - Isolated DC Voltage Input, +24VDC @ 400mA Output, DIN Mountable

$125.00

Catalog #	Shipping	Price (with options)	Qty
DCD 24S	Call for Availability

Customers Were Also Interested In These

Did you find this page useful?

Toll-Free Hotline 1-800-341-2525 • (203) 643-5000 • Fax: (203) 643-5001