|
| Power Supply Form Factor |
Standard ATX or PS/2-size |
| Form Factor Special Features |
3-position Terminal Strip on the rear panel for DC power input
Inboard mounting tabs are integral. |
| Construction - Chassis Material |
Steel |
|
| Power Supply Output Type |
ATX12V |
| Nominal Output Power |
250W |
|
| Peak Output Power |
250W |
| Output Voltage(s) |
+5VDC
+12VDC
-5VDC
-12VDC
+3.3V
+5Vsb |
| +5V Output |
Peak Output Current |
30A |
Nom. Output Current |
25A | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
50mV | | +12V Output |
Peak Output Current |
8A |
Nom. Output Current |
8A | Line Regulation |
-1%....1% | Load Regulation |
-5%....5% | Ripple and Noise |
100mV | | –12V Output |
Peak Output Current |
1A |
Nom. Output Current |
1A | Line Regulation |
-1%....1% | Load Regulation |
-2%....2% | Ripple and Noise |
100mV | | –5V Output |
Peak Output Current |
500mA |
Nom. Output Current |
500mA | Line Regulation |
-1%....1% | Load Regulation |
-3%....3% | Ripple and Noise |
100mV | | +3.3V Output |
Peak Output Current |
22A |
Nom. Output Current |
8A | Line Regulation |
-1%....1% | Load Regulation |
-3%....3% | Ripple and Noise |
50mV | | +5Vsb Output |
Peak Output Current |
720mA |
Nom. Output Current |
720mA | Line Regulation |
-1%....1% | Load Regulation |
-1%....1% | Ripple and Noise |
100mV | | +3.3V & +5V Combined Max. Power |
150W |
| Efficiency |
65% |
|
| Power Supply Input Type |
DC |
| Nominal Input Voltage |
+12VDC |
| Input Voltage Range(s) |
+9V to 16VDC |
| Input Frequency |
DC |
| Input Current |
50A @ +12V DC |
|
| Power Input Connector(s) |
2 screw terminals |
| Output Connector(s) |
Connector(s) to CPU/Motherboard |
20-pin ATX standard female connector
4-pin ATX / ATX12V additional 12V connector
ATX aux. power connector (P8-style, 6-wire, 3.3V/5V/GND) |
Length of Cable(s) to CPU/Motherboard |
14.42"
(366.27mm)
| Connector(s) to Drives/Accessories |
Standard Molex internal drive/device power connector (4-pin, female)
Floppy power connector (4-pin, female) | Length of Cable(s) to Drives/Accessories |
2.28ft
(693.93mm)
| Output Connector(s) Features & Details |
3 Standard Molex internal drive/device power connector (4-pin, female)
2 Floppy power connector (4-pin, female)
27.32 inch is longest peripheral device cable | |
| Cooling Summary |
Cooling fan |
| Number of Cooling Fans |
1 |
| Cooling Fan Details (1) |
Number of fans of this type |
1 |
Cooling Fan Size |
80mm X 80mm | |
| Operating Temperature |
-4°F....158°F
(-20°C....70°C)
|
| Storage Temperature |
-40°F....167°F
(-40°C....75°C)
|
| Vibration Resistance |
Operating |
10 to 55Hz, 2.0g for 3 min. period, 30 min. per axis |
| Shock Resistance |
Operating |
10g peak-to-peak for 20ms once on each axis |
| Altitude, Max. |
1.89mi
(3.05km)
|
| Other Environmental Specifications |
Op Temp: -20 to 70%deg;C. Derating curve will occur at 40%deg to 40°C. |
|
| Safety/Approvals |
Meets UL standards
Meets CE standards
Meets CSA standards
Meets TUV standards
Meets FCC Part 15 - Class B EMI specs
UL Certified Recognized Component ("RU" mark)
Meets UL 1950 standards
Meets RoHS standards |
| Protection |
Overvoltage |
Trip point is 5.7V to 7V output |
Short-Circuit |
Yes | | MTBF |
95620 hours |
|
| Width |
6.74"
(171.3mm)
|
| Height |
3.4"
(86.28mm)
|
| Depth |
6.83"
(173.35mm)
|
| Dimension Details |
- 6.825 inches is from back of terminal strip to end of mounting tab
- 6.100 inches is from back of power supply case to mounting tab
- 6.376 inches is from inboard side of power supply to top of terminal strip
- 5.511 inches is from inboard side of power supply to rear side, case only
|
|
| Weight |
3.86lbs
(1.75kg
)
|
| Shipping Weight |
5.56lbs
(2.52kg
)
|