|
| Power Supply Form Factor |
Standard ATX or PS/2-size |
| Form Factor Special Features |
Nickel-plated steel chassis for increased corrosion resistance. |
| Construction - Chassis Material |
Steel |
|
| Power Supply Output Type |
ATX |
| Nominal Output Power |
320W |
| Power Factor Correction (PFC) |
Active |
| Power Supply Conversion Type |
DC-input switching |
|
| Peak Output Power |
320W |
| Output Voltage(s) |
+5VDC
+12VDC
-5VDC
-12VDC
+3.3V
+5Vsb |
| +5V Output |
Peak Output Current |
32A |
Min. Output Current / Load |
2.5A | Load Regulation |
-5%....5% | Ripple and Noise |
Ripple: 50mV (peak-to-peak)
Ripple and Noise: 100mV (peak-to-peak) | | +12V Output |
Peak Output Current |
11A |
Min. Output Current / Load |
500mA | Load Regulation |
-5%....5% | Ripple and Noise |
Ripple: 100mV (peak-to-peak)
Ripple and Noise: 150mV (peak-to-peak) | | –12V Output |
Peak Output Current |
1A |
Min. Output Current / Load |
0μA | Load Regulation |
-5%....5% | Ripple and Noise |
Ripple: 150mV (peak-to-peak)
Ripple and Noise: 200mV (peak-to-peak) | | –5V Output |
Peak Output Current |
1A |
Min. Output Current / Load |
0μA | Load Regulation |
-5%....5% | Ripple and Noise |
Ripple: 150mV (peak-to-peak)
Ripple and Noise: 200mV (peak-to-peak) | | +3.3V Output |
Peak Output Current |
20A |
Min. Output Current / Load |
100mA | Load Regulation |
-5%....5% | Ripple and Noise |
Ripple: 50mV (peak-to-peak)
Ripple and Noise: 100mV (peak-to-peak) | | +5Vsb Output |
Peak Output Current |
1A |
Min. Output Current / Load |
0μA | Load Regulation |
-5%....5% | Ripple and Noise |
Ripple: 100mV (peak-to-peak)
Ripple and Noise: 100mV (peak-to-peak) | | +3.3V & +5V Combined Max. Power |
160W |
| Start-up time |
100ms |
| Hold-Up Time |
16ms |
|
| Power Supply Input Type |
DC |
| Nominal Input Voltage |
+24VDC |
| Input Voltage Range(s) |
+18 to 32VDC |
| Input Frequency |
DC |
|
| Power Input Connector(s) |
On rear panel
3 screw terminals |
| Output Connector(s) |
Connector(s) to CPU/Motherboard |
20-pin ATX standard female connector
4-pin ATX / ATX12V additional 12V connector |
Connector(s) to Drives/Accessories |
Standard Molex internal drive/device power connector (4-pin, female)
Floppy power connector (4-pin, female) | Output Connector(s) Features & Details |
- Six 4-pin peripheral connectors
- Two 4-pin floppy connectors
| |
| Power On/Off Switch |
1 on/off switch |
|
| Cooling Summary |
Cooling fan |
| Number of Cooling Fans |
1 |
| Cooling Fan Details (1) |
Number of fans of this type |
1 |
Cooling Fan Size |
80mm X 80mm | |
| Operating Temperature |
32°F....122°F
(0°C....50°C)
|
| Storage Temperature |
-4°F....140°F
(-20°C....60°C)
|
| Relative Humidity, noncondensing |
20%....90% |
| Vibration Resistance |
Operating |
0.38mm, 5-55-5Hz, 1 minutes per cycle, 30 minutes for each axis (X, Y, Z) |
| Altitude, Max. |
1.89mi
(3.05km)
|
|
| Safety/Approvals |
Meets CE standards
Meets FCC Part 15 - Class B EMI specs
Meets TUV IEC 950 specs
Meets UL 1950 standards
Meets cUL 950 standards |
| Protection |
Overvoltage |
- 3.3V Output set at 4.1VDC, +/- 0.4VDC
- +5V Output set at 6.25VDC, +/- 0.75VDC
- +12V Output set at 14.6VDC, +/- 1VDC
|
Short-Circuit |
Yes, power supply shuts down upon detection of a short circuit | Overpower |
150% | |
| Width |
5.91"
(150mm)
|
| Height |
3.39"
(86mm)
|
| Depth |
5.51"
(140mm)
|
|
| Weight |
4lbs
(1.81kg
)
|
