CyberResearch Home 1-800-341-2525 HomeProductsLive HelpPrintClose Window
Home  Data Acquisition & Control Systems  Modular / Remote Data Acquisition  CYMOD & ADAM Modules
You Can Easily Pnel-Mount, DIN Rail-Mount, or Piggyback-Mount Modules
You Can Easily Pnel-Mount, DIN Rail-Mount, or Piggyback-Mount Modules
ADAM 4015

ADAM Remote Data Acquisition Module - 6 Channels of 16-bit A/D for RTDs

Qty   Price (with options selected)
Shipping: 1-2 weeks
 Features
System BusRS-422/485 serial
Number of Channels6
A/D Converter Resolution16-bit
Max. A/D Speed (throughput)10Hz
You Can Easily Pnel-Mount, DIN Rail-Mount, or Piggyback-Mount Modules Modules Communicate Over a Single Twisted Pair
 
Introduction

There are two ADAM™ modules that accept RTD inputs.  Both accept Pt and Ni
RTDs, and both provide 3000VDC isolation.

  • ADAM 4013 has one differential input with 2 megohms impedance and supports 10 different types of Pt and Ni RTDs.
  • ADAM 4015 has six differential inputs with 10 megohms impedance and supports Pt, Ni, and Balco RTDs. 

ADAM modules use a single twisted pair of wires to transmit and receive data. All module commands are issued in printable ASCII characters. You can easily panel-mount, DIN-rail-mount, or piggyback-mount modules. Removable screw terminal connectors make wiring and field maintenance easy.

Modules accept any unregulated power source between 10 and 30 VDC. A watchdog timer supervisory function automatically resets the modules in the event of system failure.

Our CyMOD series of modules has been designed with state-of-the art surface-mount technology to be completely hardware and software compatible with the ADAM series, at a somewhat lower cost.  CM 4011, CM 4011D, and CM 4018 are thermocouple modules that parallel the similarly numbered ADAM modules. 

  Less Detail  More Detail
Product Information
System Bus RS-422/485 serial
Mounting Configuration Desktop / benchtop
Wall-mount
External module
DIN-rail mount
Direct Sensor Input RTD
Analog Input Channels
Number of Channels 6
Differential Channels 6
A/D Converter Resolution 16-bit
Max. A/D Speed (throughput) 10Hz
Bandwidth 2.62Hz
A/D Speed/Bandwidth Details 2.62Hz is the bandwidth of the RTD input signals
Accuracy Relative Accuracy ±0.05% or better
Zero Drift ±3µV/°C
Temperature Drift Span drift:  ±25 ppm/deg. C
Noise CMRR (Common Mode Rejection Ratio) 150dB (50/60Hz)
NMRR (Normal Mode Rejection Ratio) 100dB (50/60Hz)
Input Impedance 10MΩ
A/D Special Features Accepts Pt, Balco, and Ni RTDs
Input Ranges
RTD Types Supported 100-ohm Platinum (-100° to +100°C), alpha = 0.00385 (IEC)
100-ohm Platinum (0° to +100°C), alpha = 0.00385 (IEC)
100-ohm Platinum (0° to +600°C), alpha = 0.00385 (IEC)
100-ohm Platinum (0° to +100°C), alpha = 0.003916 (JIS)
100-ohm Platinum (0° to +200°C), alpha = 0.003916 (JIS)
50-ohm Nickel (-80° to +100°C)
100-ohm Platinum (-50° to +150°C), alpha = 0.00385 (IEC)
100-ohm Platinum (-50° to +150°C), alpha = 0.003916 (JIS)
100-ohm Platinum (-200° to +200°C), alpha = 0.00385 (IEC)
100-ohm Platinum (0° to +400°C), alpha = 0.00385 (IEC)
100-ohm Platinum (-200° to +200°C), alpha = 0.003916 (JIS)
100-ohm Platinum (0° to +400°C), alpha = 0.003916 (JIS)
500-ohm Balco (-30° to +120°C)
508-ohm Nickel (-0° to +100°C)
A/D Range Selection Software
Isolation, Field-to-Logic 3000VDC
Software
Software Included - Features Setup and utility software included
Operating System Compatibility Windows XP
Windows NT
Windows 2000
Windows 98
Windows 95
Windows 98SE
Cables and Connectors
Connector #1 Quantity 20
Type Screw terminals as removable (lift-off) terminal strips
Location On module
Construction
Construction Material Plastic
Impact resistant ABS plastic
Power
Power Consumption (typical) 1.2W @ 24VDC
Power Supply Notes Power Requirements: Unregulated +10 to +30VDC
System Monitoring
Watchdog Timer Included Yes
Watchdog Timer Intervals 100ms to 100 seconds in 0.1-second intervals
Environmental Specifications
Operating Temperature 32°F....158°F (0°C....70°C)
Relative Humidity, noncondensing 0%....95%
Safety & Standards Compliance
Safety/Approvals Meets CE standards
Less Detail Less Detail
 
Ordering - Includes Options Indicated Below
ADAM 4015
ADAM Remote Data Acquisition Module - 6 Channels of 16-bit A/D for RTDs
$495.00

Driver Software Options
None  
PCL LV
LabVIEW® Controls for Win95/98/200/NT
$0.00
PCL OCX
ActiveX® Controls for Win95/98/NT
$0.00
ADAM OPC
ADAM OPC Server Software for Win98/NT/2000/XP
$225.00

Serial Converters and Repeaters
None  
ADAM 4510S
ADAM Isolated RS-422/485 Repeater Module, 115.2 kpbs Data Rate, with Screw Terminals & 3000VDC Isolation
$230.00
ADAM 4520
ADAM Remote RS-232 to RS-422/485 Converter Module, 115.2 kpbs Data Rate, with Screw Terminals and 3000VDC Isolation
$135.00
CM 4510
CyMOD RS-422/485 Repeater Module
$100.00
CM 4520
CyMOD RS-232 to RS-422/485 Converter Module, 5000 Vrms Isolation
$100.00
CM 4530
CyMOD USB to RS-232/422/485 Converter Module, 2500 Vrms Isolation, with 10-Pin Screw Terminal Block and LED Indicator
$150.00

Power Supply Options
None  
CM 243
24VDC Power Supply, 72W, Provides 3A @ 24V from 110/220VAC
$125.00
Catalog # Shipping Price (with options) Qty  
ADAM 4015 1-2 weeks
Customers Were Also Interested In These
Did you find this page useful?
Toll-Free Hotline 1-800-341-2525 • (203) 643-5000 • Fax: (203) 643-5001
©Copyright 2013 , CyberResearch Inc., Branford, CT USA All Rights Reserved