ADAM 4019 - ADAM Remote Data Acquisition Module - 8 Channels of 16-bit A/D with Thermocouple Support

Home

Data Acquisition & Control Systems

Modular / Remote Data Acquisition

CYMOD & ADAM Modules

8-Channel Data Acquisition Module Mounts on DIN Rail or in Panel

ADAM 4019
ADAM Remote Data Acquisition Module - 8 Channels of 16-bit A/D with Thermocouple Support
Qty	Price (with options selected)
Shipping: Call for Availability

Features

	System Bus		RS-422/485 serial
	Number of Channels		8
	A/D Converter Resolution		16-bit
	Max. A/D Speed (throughput)		10Hz

Introduction

There are four ADAM™ modules that accept thermocouple inputs. All four accept J, K, T, E, R, S, & B-type thermocouples, and all provide 3000VDC isolation.

ADAM 4011 has one differential input with 2 megohms impedance.
ADAM 4019 has 8 differential inputs with 20 megohms impedance, and it accepts Modbus inputs.
ADAM 4018 has 6 differential plus 2 single-ended inputs with 20 megohms impedance.
ADAM 4018M adds a data logger to ADAM 4018.

ADAM modules use a single twisted pair of wires to transmit and receive data. All module commands are issued in printable ASCII characters. You can easily panel-mount, DIN-rail-mount, or piggyback-mount modules. Removable screw terminal connectors make wiring and field maintenance easy.

Modules accept any unregulated power source between 10 and 30 VDC. A watchdog timer supervisory function automatically resets the modules in the event of system failure.

Our CyMOD series of modules has been designed with state-of-the art surface-mount technology to be completely hardware and software compatible with the ADAM series, at a somewhat lower cost. CM 4011 and CM 4018 are thermocouple modules that parallel the similarly numbered ADAM modules.

				Less Detail

Product Information
System Bus		RS-422/485 serial
Bus Information	Baud Rate, Max.	115.2 kbps
Mounting Configuration		Desktop / benchtop Wall-mount External module DIN-rail mount
Direct Sensor Input		Thermocouple
Analog Input Channels
Number of Channels		8
Differential Channels		8
A/D Converter Resolution		16-bit
Max. A/D Speed (throughput)		10Hz
A/D Speed/Bandwidth Details		Bandwidth 13.1Hz @ 50 Hz Bandwidth 15.72Hz @ 60Hz
Cold Junction Compensation		CJC on all channels
Accuracy	Relative Accuracy	±0.01%
	Zero Drift	+/-30mV/deg. C
	Temperature Drift	Span drif5t: +/- 25 ppm/deg. C
Noise	CMRR (Common Mode Rejection Ratio)	92 dB min. @ 50/60 Hz.
Input Impedance		20MΩ
Input Protection		Protected against voltages to +/-35VDC, max. with power on
A/D Special Features		Accepts Modbus input.
Input Ranges
Bipolar Input Ranges		-10V to +10V -5V to +5V -2.5V to +2.5V -1V to +1V -100mV to +100mV -500mV to +500mV
Current Input Ranges		-20 to +20mA
Thermocouple Support	Thermocouple Inputs	J-type thermocouple K-type thermocouple T-type thermocouple E-type thermocouple R-type thermocouple S-type thermocouple B-type thermocouple
	J-type Range Supported	32°F....1400°F (0°C....760°C)
	K-type Range Supported	32°F....2498°F (0°C....1370°C)
	T-type Range Supported	-148°F....752°F (-100°C....400°C)
	E-type Range Supported	32°F....1832°F (0°C....1000°C)
	R-type Range Supported	932°F....3182°F (500°C....1750°C)
	S-type Range Supported	932°F....3182°F (500°C....1750°C)
	B-type Range Supported	932°F....3182°F (500°C....1750°C)
A/D Range Selection		Software
Input Range Details		Thermocouple, mV, V, and mA ranges
Gains		1 2 4 10 20 100
Gain Range Details		Gains apply only to base range of +/- 10V
Isolation, Field-to-Logic		3000VDC
Software
Software Included - Features		Setup and utility software included
Operating System Compatibility		Windows XP Windows 2000 Windows 98 Windows 95 Windows 98SE
Cables and Connectors
Connector #1	Quantity	20
	Type	Screw terminals as removable (lift-off) terminal strips
	Location	On module
Construction
Construction Material		Plastic Impact resistant ABS plastic
Power
Power Consumption (typical)		1.2W @ 24VDC
Power Supply Notes		Power Requirements: Unregulated +10 to +30VDC
System Monitoring
Watchdog Timer Included		Yes
Environmental Specifications
Operating Temperature		32°F....158°F (0°C....70°C)
Relative Humidity, noncondensing		0%....95%
Safety & Standards Compliance
Safety/Approvals		Meets CE standards

Less Detail

Ordering - Includes Options Indicated Below

ADAM 4019
ADAM Remote Data Acquisition Module - 8 Channels of 16-bit A/D with Thermocouple Support

$375.00

Driver Software Options
	None
		PCL LV LabVIEW® Controls for Win95/98/NT	$0.00
		PCL OCX ActiveX® Controls for Win95/98/NT	$0.00
		ADAM OPC ADAM OPC Server Software for Win95/98/NT	$225.00

Serial Converters and Repeaters
	None
		ADAM 4510S ADAM Isolated RS-422/485 Repeater Module, 115.2 kpbs Data Rate, with Screw Terminals & 3000VDC Isolation	$155.00
		ADAM 4520 ADAM Remote RS-232 to RS-422/485 Converter Module, 115.2 kpbs Data Rate, with Screw Terminals and 3000VDC Isolation	$95.00
		CM 4510 CyMOD RS-422/485 Repeater Module	$120.00
		CM 4520 CyMOD RS-232 to RS-422/485 Converter Module, 5000 Vrms Isolation	$90.00
		CM 4530 CyMOD USB to RS-232/422/485 Converter Module, 2500 Vrms Isolation, with 10-Pin Screw Terminal Block and LED Indicator	$125.00

Power Supply Options
	None
		CM 243 24VDC Power Supply, 72W, Provides 3A @ 24V from 110/220VAC	$100.00

Catalog #	Shipping	Price (with options)	Qty
ADAM 4019	Call for Availability

Customers Were Also Interested In These

Did you find this page useful?

Toll-Free Hotline 1-800-341-2525 • Tel: 203-483-8815 • Fax: 203-483-9024