CM 7019R - - CyberResearch

Home

Data Acquisition & Control Systems

Modular / Remote Data Acquisition

CYMOD & ADAM Modules

8-Channel Analog Input Module with Voltage/Current/Thermocouple A/D and High Voltage Protection

CM 7019R
CyMOD Remote Analog Input Module - 8 Diff. Channels of 8Hz 16-bit Voltage / Current / Thermocouple A/D, High Voltage Protection, 20 Screw Terminals, RS-485
Qty	Price (with options selected)
Shipping: Low Stock

Features

	System Bus		RS-422/485 serial
	Number of Channels		8
	A/D Converter Resolution		16-bit
	Max. A/D Speed (throughput)		8Hz

Introduction

The CM 7019R analog input module features 8 differential channels. The varsatile module handles many of your industrial remote data acquisition needs. It accepts direct input from 11 types of thermocouples, as well as 9 voltage ranges, and 1 current range. 3000VDC isolation voltage protects from stray power spikes.

The dual watchdog timer monitors both the module and the host PC, re-starting the module if it halts, or going into safe mode if contact with the host PC is lost.

Host Watchdog Timer (software): If contact is lost with the host PC, after 5 seconds (user-set in 100ms increments) the output lines on the modules will automatically go into their safe states (user-selectable) to prevent unpredictable damage.
Module Watchdog Timer (hardware): If the module halts, the module watchdog timer will reset the module and any output lines will revert to their pre-defined power-on values.

				Less Detail

Product Information
System Bus		RS-422/485 serial
Bus Information	Baud Rate, Max.	115.2 kbps
	System Bus Details	Designed for a 4-wire connection via 4 screw terminals: Data+, Data-, +10 to 30VDC power, and Ground.
Mounting Configuration		Desktop / benchtop Wall-mount External module DIN-rail mount Stacking module or daughterboard
Direct Sensor Input		Thermocouple
Analog Input Channels
Number of Channels		8
Differential Channels		8
A/D Converter Resolution		16-bit
Max. A/D Speed (throughput)		8Hz
Typ. A/D Speed (throughput)		8Hz
Bandwidth		5.24Hz
Cold Junction Compensation		Independent input channel for CJC
Accuracy	Zero Drift	±10µV/°C
Noise	CMRR (Common Mode Rejection Ratio)	86dB @ 50/60Hz
Input Protection		Protected against field voltages to 240Vrms, max.
Input Ranges
Bipolar Input Ranges		-10V to +10V -5V to +5V -2.5V to +2.5V -1V to +1V -100mV to +100mV -50mV to +50mV -500mV to +500mV -150mV to +150mV -15mV to +15mV
Current Input Ranges		-20 to +20mA
Thermocouple Support	Thermocouple Inputs	J-type thermocouple K-type thermocouple T-type thermocouple E-type thermocouple R-type thermocouple S-type thermocouple B-type thermocouple N-type thermocouple C-type thermocouple L-type thermocouple M-type thermocouple L-type (DIN 43710) thermocouple
	J-type Range Supported	-346°F....1400°F (-210°C....760°C)
	K-type Range Supported	-454°F....2501.6°F (-270°C....1372°C)
	T-type Range Supported	-454°F....752°F (-270°C....400°C)
	E-type Range Supported	-454°F....1832°F (-270°C....1000°C)
	R-type Range Supported	32°F....3214.4°F (0°C....1768°C)
	S-type Range Supported	32°F....3214.4°F (0°C....1768°C)
	B-type Range Supported	32°F....3308°F (0°C....1820°C)
	N-type Range Supported	-454°F....2372°F (-270°C....1300°C)
	C-type Range Supported	32°F....4208°F (0°C....2320°C)
	L-type Range Supported	-328°F....1472°F (-200°C....800°C)
	L-type (DIN 43710) Range Supported	-328°F....1652°F (-200°C....900°C)
	M-type Range Supported	-328°F....212°F (-200°C....100°C)
A/D Range Selection		Software
Input Range Details		Current input range requires no external resistor, and is selected via jumper for each channel individually.
Isolation, Field-to-Logic		3000VDC
Software
Software Included - Features		OCX, DDE, & DDL libraries, DasyLab & ActiveX drivers on CD-ROM
Cables and Connectors
Connector #1	Quantity	20
	Type	Screw terminals as removable (lift-off) terminal strips
	Location	On module
Connector & Cabling Details		5.08-pitch holes for the terminal blocks Two removable 10-terminal screw terminal blocks make wiring and field maintenance easy: leave your wiring intact while connecting or disconnecting modules
Construction
Construction Material		Impact resistant ABS plastic
Power
Power Consumption (typical)		1.2W
Power Supply Notes		Input: +10VDC to +30VDC
Indicators & Controls
Other Control Features		Power indicator LED
System Monitoring
Watchdog Timer Included		Yes
Dimensions
Width		2.85" (72.4mm)
Height		4.76" (121mm)
Depth		1.3" (33mm)
Dimension Details		Depth (no DIN rail mtg block installed): 1.3" (33mm) Depth (DIN rail mtg block installed): 1.496" (38mm)
Weight
Weight		0.3lbs (136.08g )

Less Detail

Ordering - Includes Options Indicated Below

CM 7019R
CyMOD Remote Analog Input Module - 8 Diff. Channels of 8Hz 16-bit Voltage / Current / Thermocouple A/D, High Voltage Protection, 20 Screw Terminals, RS-485

$375.00

Catalog #	Shipping	Price (with options)	Qty
CM 7019R	Low Stock

Customers Were Also Interested In These

Did you find this page useful?

Toll-Free Hotline 1-800-341-2525 • (203) 643-5000 • Fax: (203) 643-5001