C5B 40-04 - 5B Signal Conditioning Module - Isolated Wide-Bandwidth Millivolt Input, ±10mV Input, 0V to +5V Output

Home

Data Acquisition & Control Systems

Terminal Panels / Breakout Panels

Analog Signal Conditioning

C5B Modules Mount Into Any Standard 5B Backplane

C5B 40-04
5B Signal Conditioning Module - Isolated Wide-Bandwidth Millivolt Input, ±10mV Input, 0V to +5V Output
Qty	Price (with options selected)
Shipping: Call for Availability

Features

	System Bus		5B Series
	Number of Channels		1
	Number of Analog Output (D/A) Channels		1
	Number of I/O Lines		1

Introduction

Each C5B 40 wide bandwidth voltage input module provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level analog voltage output. This voltage output is logic-switch controlled, allowing these modules to share a common analog bus without the requirement of external multiplexers.

The C5B modules are designed with a completely isolated computer-side circuit which can be floated to ±50V from Power Common (pin 16). This complete isolation means that no connection is required between I/O Common and Power Common for proper operation of the output switch. If desired, the output switch can be turned on continuously by simply connecting pin 22, the Read-Enable pin, to I/O Common (pin 19).

The input signal is processed through a pre-amplifier on the field side of the isolation barrier. This pre-amplifier as a gain-bandwidth product of 5MHz and is bandwidth limited to 10kHz. After amplification, the input signal is chopped by a proprietary chopper circuit. Isolation is provided by transformer coupling, again using a proprietary technique to suppress transmission of common mode spikes or surges. The module is powered from +5VDC (±5%).

A special input circuit on the module provides protection against accidental connection of power-line voltages up to 240VAC.

				Less Detail

Product Information
System Bus		5B Series
Mounting Configuration		Plug-in module (requires a backplane)
Module Mounting Compatibility		5B series
Analog Input Channels
Number of Channels		1
Differential Channels		1
Bandwidth		4Hz
Speed/Bandwidth Details		Bandwidth, -3dB: 10kHz
Accuracy	Relative Accuracy	+/- 0.03% of span
	Nonlinearity	+/- 0.01% of span
	Temperature Drift	+/- 1 microvolt/°C
Noise	CMRR (Common Mode Rejection Ratio)	100dB, 50Hz or 60Hz
	NMRR (Normal Mode Rejection Ratio)	-3dB @ 10kHz, 120dB per decade above 10kHz
	Noise	0.1 to 10Hz: 0.4 microvolts rms
Input Impedance		200MΩ
Input Impedance Details		Power off: 40 kilohms; overload: 40 kilohms
Input Protection		Protected against field voltages to 240Vrms, max. Field side can be offset +/-50V differential from power common
Input Ranges
Bipolar Input Ranges		-10mV to +10mV
Isolation, Field-to-Logic		1500Vrms
Isolation Details		1500Vrms transformer isolation
Trigger Modes
Triggering Type(s) Supported		External pulse trigger (triggered by pulse on trigger input)
Analog Output Channels
Number of Analog Output (D/A) Channels		1
Unipolar Output Ranges		0 to +5V
Current Limit		+/-8mA
Noise		100kHz: 10mVp-p
Output Protection		Continuous short to ground
Settling Time, typ.		250 microseconds to 0.1%. Rise Time: 35 microseconds for 10 to 90% span
Digital I/O Lines
Number of I/O Lines		1
Configuration		Output enable control/input
Inputs	Input Voltage - High (Vih, DC)	2.4V....36V
	Input Current, High (Iih)	0.5μA
	Input Voltage - Low (Vil)	0mV....0.8V
	Input Current, Low (Iil)	0.5μA
	Digital Input Features	Trigger voltage accomodates signals of 2.4VDC to 36VDC
Connector Pinout Standard		5B series (26-pin)
Cables and Connectors
Connector #1	Quantity	1
	Type	26-pin 5B-standard
	Gender	Male (pin)
	Location	On module
Construction
Construction Material		Plastic
Power
Power Consumption (typical)		30mA typ. @ 4.75 to 5.25VDC
+5V		30mA
Environmental Specifications
Operating Temperature		-40°F....185°F (-40°C....85°C)
Storage Temperature		-40°F....185°F (-40°C....85°C)
Relative Humidity, noncondensing		0%....95%
Safety & Standards Compliance
Safety/Approvals		Meets CE standards CSA certified
Dimensions
Width		0.6" (15.24mm)
Height		2.28" (57.91mm)
Depth		2.26" (57.4mm)

Less Detail

Ordering - Includes Options Indicated Below

	C5B 40-01 5B Signal Conditioning Module - Isolated Wide-Bandwidth Millivolt Input, ±10mV Input, ±5V Output	$175.00
	C5B 40-02 5B Signal Conditioning Module - Isolated Wide-Bandwidth Millivolt Input, ±50mV Input, ±5V Output	$175.00
	C5B 40-03 5B Signal Conditioning Module - Isolated Wide-Bandwidth Millivolt Input, ±100mV Input, ±5V Output	$175.00
	C5B 40-04 5B Signal Conditioning Module - Isolated Wide-Bandwidth Millivolt Input, ±10mV Input, 0V to +5V Output	$175.00
	C5B 40-05 5B Signal Conditioning Module - Isolated Wide-Bandwidth Millivolt Input, ±50mV Input, 0V to +5V Output	$175.00
	C5B 40-06 5B Signal Conditioning Module - Isolated Wide-Bandwidth Millivolt Input, ±100mV Input, 0V to +5V Output	$175.00
	C5B 40-07 5B Signal Conditioning Module - Isolated Wide-Bandwidth Millivolt Input, ±1V Input, 0V to +5V Output	$175.00

Cable Options
	None
		5BP CBL Custom Cable from C5BP Series Panels to DAS Board, 6 ft	$59.00
		5BP CBX Daisy-Chaining Cable to Additional C5BP 02/06 Panel	$59.00
		CBL 2602 26-Pin Ribbon Cable, 26-Pin F-F header, 2 ft	$25.00

Catalog #	Shipping	Price (with options)	Qty
C5B 40-04	Call for Availability

Customers Were Also Interested In These


	C5B 31-02	$175.00
	5B Signal Conditioning Module - Isolated Voltage Input, ±5V Input, ±5V Output


	C5B 31-03	$175.00
	5B Signal Conditioning Module - Isolated Voltage Input, ±10V Input, ±5V Output


	C5B 31-04	$175.00
	5B Signal Conditioning Module - Isolated Voltage Input, ±1V Input, 0V to +5V Output

Did you find this page useful?

Toll-Free Hotline 1-800-341-2525 • (203) 643-5000 • Fax: (203) 643-5001